Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly saved materials. In recent years, metal 3D printing technology has gradually been applied to the manufacture of dental crowns, bridges, stents, etc. However, 3D printing of ceramic dentures is difficult. The difficulty lies in the material and laser curing technology, while maintaining the fluidity of the material, it must be able to condense quickly.

According to reports, the ceramic 3D printer uses laser scanning to solidify high ceramic content slurry. During the printing process, the laser power, laser spot size and scanning speed are variable.

At present, the products of the 3D printed zirconia ceramic dental production line have passed the mechanical performance and biological inspection, and in October 2017 obtained the first domestic 3D printed ceramic denture medical device registration certificate. It is reported that the material utilization rate of this 3D printed zirconia ceramic denture can reach more than 90%, the denture has no internal cracks, and the cost is low, which is very conducive to the popularization and application of 3D printed ceramic dentures.

Our company SAT NANO can supply Yttria-stabilized zirconia, YSZ for 3D printing ceramic dental. It is ultra-transparent particle size, uniform distribution, small grains, suitable for 3D printing dental. if you have any enquiry, please feel free to contact us at admin@satnano.com