13929258449

admin@satnano.com

Blog

Home

Blog

How to spray highly catalyzed photocatalyst nano titanium dioxide 5nm nanoparticle

December 25,2018.
Specification of titanium dioxide nanopowder:
The particle size is very small: an average particle size of 5 nm.
Good dispersion performance: 5 nm titanium dioxide has good dispersibility and can be self-dispersed into pure water without stirring. The dispersed liquid can be sprayed onto the surface of the furniture and the wall to form a uniform nano-coating to purify the indoor air.

High catalytic activity: The catalytic activity of 5 nm titanium dioxide has been tested to degrade indoor formaldehyde, benzene, ammonia and other harmful gases, and the deodorization effect is good.

Appearance:light yellow white powder

Purity:99.9%

Usage: Dissolve 100g of TiO2 nanopowder into 10kg of purified water, or distilled water, deionized water, etc., to make a 1% aqueous solution, spray directly on the wall, home surface, and car interior.

Precautions for use:
1. Note that indoor dark furniture and high-gloss furniture are recommended to be constructed with imported spray guns with a diameter of 0.5mm-1mm. Evenly sprayed evenly during spraying, no sag and unevenness can be produced.
2, metal stainless steel and other parts are recommended not to spray, to protect before construction.
3, when the furniture is constructed, it mainly deals with the rough surface of the furniture, the side, back, inner and bottom of the furniture.
4, the wallpaper is recommended to use 0.5% or lower spray, or not spray.
5, do not spray to the human body, if sprayed to the eyes, wash thoroughly with running water.
6. When spraying, the distance from the sprayed surface is too close, the spray liquid will flow and leave traces; if the distance from the sprayed surface is too far, white spots or adhesion will decrease. Therefore, follow the spraying distance according to the construction specifications.
7. After spraying the JR05 photocatalyst, clean the spray equipment with clean water to prevent nozzle clogging and corrosion.
8. During the construction, the product solution should be wiped clean when it is sprayed onto other objects that are not on the spray surface or flow to other objects.
9. Where there is moisture, spray it thoroughly after drying. Spraying the surface within 2 hours after spraying is strictly prohibited from contact with water.
10. Avoid construction of confined spaces and fully ventilate after construction.
For the construction area of 11,100 m2, it is recommended to use 100g photocatalyst powder. The specific dosage is based on the over-standard condition.
12, wearing goggles, wearing a mask, wearing gloves and other protective equipment during construction.

Our company SAT NANO can supply titanium dioxide nanoparticle 5nm for customers to do the research, please feel free to contact us.

Leave a message Please click here for inquiry
Provide the right solution according to your needs,offer efficient service,leave a message for the product information and requirements you need,customize now!