-
1. Titanium carbide tool materials AL2O3-TIC ceramics is the earliest development of composite ceramic tool system. Hard particles of nano-titanium carbide with a mass fraction of 15-40% are dispersed in the matrix, which not only improves the hardness of the material, but also improves the fracture toughness of the material. The cutting performance of the composite AL2O3-TIC ceramic tool is much ...
Read More
-
3D printing is a flexible technology with less constraints on design. With the help of 3D printing technology, designers can realize complex design schemes such as lightweight structures and functional integrated structures. Many metal 3D printed parts require traditional machining processes such as milling and EDM to generate accurate surfaces. However, metal 3D printing technology often produces...
Read More
-
Many metal 3D printed metal parts need to be machined to produce a precise surface, but because metal 3D printed parts are often lightweight parts with complex geometric shapes, this brings challenges to subsequent machining. When machining metal 3D printed parts, it is necessary to consider whether the rigidity of 3D printing meets the requirements of machining, how to clamp these complicated met...
Read More
-
Nano particles are used in automotive coatings due to their special effects, which can improve the traditional performance of coatings and give them new functions, greatly improving product quality, and providing new opportunities for improving the technical content of automotive coatings. 1. Anti-scratch and stone-strike nano automotive coatings The surface of the car body is often scratched by m...
Read More
-
Black silicon carbide is made of quartz sand, petroleum coke and high-quality silica as the main raw materials, and is smelted at high temperature in a resistance furnace. The raw materials used in the manufacture of green silicon carbide, such as black silicon carbide, are roughly the same, and industrial salt is added as a reactant and accelerator to react in a resistance furnace. In terms of it...
Read More
-
As a key member of non-metallic materials, ceramic materials have a large number of attractive properties, such as good mechanical and electrochemical properties, low thermal conductivity, dense and uniform structure, wear resistance and corrosion resistance, etc. The high specific stiffness, high specific strength and chemical inertness of ceramic materials in complex environments, and the low de...
Read More
-
Many people think that graphite powder is carbon powder. In fact, there is still a big difference between graphite powder and carbon powder. Next, SAT NANO will introduce the difference between the two in detail; Toner generally refers to toner, which is widely used in printer cartridges. The main component of toner (also known as toner) is not carbon, but most of it is composed of resin and carbo...
Read More
-
1 Zirconium carbide is used in cemented carbide Zirconium carbide is an important high-temperature structural material with high melting point, high strength and corrosion resistance. It can improve the strength and corrosion resistance of cemented carbide. Its excellent characteristics make it have a lot of application space in cemented carbide. Using zirconium carbide instead of expensive tantal...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, and the performance of β type is better than that of α type. Type β has ...
Read More
-
Carbon nanotubes are simply classified according to the number of layers of graphene sheets: single-walled carbon nanotubes and multi-walled carbon nanotubes. The difference between the two is mainly reflected in: 1. Discover the time difference In 1991, when Li Ji-ma, an electron microscope expert in the Basic Research Laboratory of NEC Corporation, Japan, observed the C60 structure under a high-...
Read More
-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
-
Dental restoration parts customization Solution 1. Personalized and complex geometric products are the areas where metal 3D printing technology is best at, ensuring a good match with the patient’s mouth, and the surface roughness of the parts is very suitable for the adhesion between the ceramic outer layer and the body 2. Cobalt-chromium alloy is used for printing materials, which has good biolog...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
