-
The silicon carbide nanopowder has high purity, small particle size distribution range and high specific surface area; nano-silicon carbide has stable chemical properties, high thermal conductivity, small thermal expansion coefficient, high hardness and Mohs hardness of 9.5. Nano silicon carbide wear-resistant, high temperature resistant, corrosion resistant, acid and alkali resistant solvents. 1....
Read More
-
The aluminum nitride nanopowder has the characteristics of high specific surface area, high hardness, high thermal conductivity and high insulation. It is a diamond-like nitride, stable to 2200 ° C, high room temperature strength, good compatibility with the substrate interface, and can improve compounding. Thermal and dielectric properties, mechanical properties and wear resistance of the materia...
Read More
-
New energy vehicles, communications and portable devices require lithium-ion batteries for high capacity and high endurance. Lithium-ion batteries urgently need to be updated to increase capacity, cycle and size. At present, the silicon-carbon negative electrode of lithium battery is all kinds of carbon materials mainly composed of graphite, and its theoretical capacity is only 372 mAh/g. In pract...
Read More
-
Due to the influence of diseases, aging, frequent traffic accidents and other factors, the number of cases of bone injury has increased year by year. According to statistics, there are 3 million orthopedic cases every year in China, and the demand for bone substitute materials is increasing. In recent years, bone substitute materials represented by hydroxyapatite have gradually become the darling ...
Read More
-
Aluminum nitride (AlN) is a new type of ceramic material with excellent comprehensive properties. It has excellent thermal conductivity, reliable electrical insulation, low dielectric constant and dielectric loss, non-toxicity and thermal expansion coefficient matching with silicon. The excellent characteristics of the series are considered to be ideal materials for a new generation of high-concen...
Read More
-
First, the advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides such as cerium oxide, cerium oxide, calcium oxide, magnesium oxide. The stability of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria doped zirconia has good comprehensive properties and is the...
Read More
-
Nano gold powder refers to tiny particles of gold with a diameter of 1 to 100 nm. It has high electron density, dielectric properties and catalytic properties, and can bind to a variety of biomacromolecules without affecting its biological activity. Preparation of gold nanoparticles with different particle sizes by chloroauric acid reduction. The effect on human skin is as follows: By massaging th...
Read More
-
Silicon nitride Si3N4 is a non-oxide high temperature ceramic structural material. Powdered Si3N4 can be prepared by reacting a mixture of SiCl4 vapor and NH3 gas. Powdered Si3N4 is unstable to air and water. Powdered Si3N4 can form a pungent odor, a gas commonly used as a refrigerant and a poorly soluble acid when it is in contact with water. Powdered Si3N4 can generate N2 and contact with air. a...
Read More
-
1. Overview of ultrafine powder 1.1 Definition of ultrafine powder There is no completely consistent statement about the particle size boundaries of ultrafine powders. Due to the difference in the use, preparation method and technical level of ultrafine powders in various countries and industries, the particle size of ultrafine powders is divided. For example, the particle size of ultrafine powder...
Read More
-
Since ultrafine powder has surface effect, small size effect, quantum effect and macroscopic quantum tunneling effect, it has many special properties in catalytic, optical, magnetic and mechanical properties compared with crystalline materials of the same composition. There are many important applications in the fields of medicine, microelectronics, and nuclear technology. "Plasma milling" refers ...
Read More
-
The gold we usually see is golden yellow, but the nano gold powder is pink; the iron can not be ignited at normal temperature, but the nano iron powder can ignite. Why did these metals become tiny nanoparticles and the properties changed completely? Now let's take a closer look at the skills of nano gold particles and see how they have wonderful functions. 1.Smart microcircuit Behind the LCD scree...
Read More
-
The purpose of surface modification of ultrafine powder is: 1. In order to improve or change the dispersibility of powder particles; 2. Improve durability, such as resistance, light resistance, heat resistance, weather resistance, etc.; 3. Improve particle surface activity; Adding new physical, chemical and mechanical properties and new functions to the surface of the particles to increase the add...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
