-
What is a thermally conductive gel? Thermally conductive gel: It has some advantages of thermally conductive silicone sheet and thermally conductive silicone grease, while making up for some of the weaknesses of the two; strong plasticity, can fill uneven interfaces. What are the advantages of thermal gel? 1. Efficient thermal conductivity; 2. Low compressive force application and low stress; 3. H...
Read More
-
Alumina powder can be used in abrasives, ceramics, medicine, cosmetics, aerospace, thermal media, etc. Today the editor will talk about a very small class of alumina applications: thermally conductive alumina powder for electronic potting adhesives in thermally conductive media. First of all, electronic encapsulants are mainly divided into three categories: silicone encapsulants, epoxy encapsulant...
Read More
-
As a product with a wide range of performance, high temperature alumina can be used in many different industries, including the application in catalysts. However, in order to achieve the specified use standard, it can be carried out according to the operations specified below. 1. Adsorbents: This type of carrier is a porous substance with a large specific surface area. High temperatur...
Read More
-
1) Characteristics of aluminum powder, Aluminum is a silver-gray metal, which is relatively divided and suitable for pigment aluminum powder. Aluminum powder paste is a mixture of pigment aluminum powder and solvent. Its uses and characteristics are roughly the same as aluminum powder. Due to the mass of 26.98, the relative density of 2.55, the purity of 99.5%, the melting point of aluminum is 685...
Read More
-
The role of metals aluminum in refractory materials: Plastic phase forming: The metal lattice will slip under the action of stress, which has plastic characteristics. Compared with the hard inorganic material particles, it will play the plastic forming characteristics during the forming process, so that the same The density of the green body prepared under the forming pressure is higher than that ...
Read More
-
Flake aluminum powder is also known as aluminum powder pigment. Aluminum powder pigment is one of the important metal pigments. It is a high-purity (99.3%~99.97%) metal aluminum as raw material, which is produced by wet ball milling process. Compared with other pigments, aluminum powder pigments have their unique performance characteristics. Characteristics of flake aluminum powder 1) Covering cha...
Read More
-
Application of flake aluminum powder 1) Industrial coatings The industrial coatings market includes the following areas: can coatings, coil coatings, general industrial coatings, marine coatings, powder coatings, anti-corrosion coatings, roof coatings, etc. The three types of coatings with the largest amount of aluminum powder pigments are: roof coatings (increasing aesthetics, extending the...
Read More
-
Niobium (Nb) is a refractory metal with a high melting point (2468°C), moderate density, corrosion resistance, radiation resistance, high temperature strength, and good high temperature mechanical properties. The excellent properties of niobium and niobium alloys make it one of the important candidate materials for high-temperature structural parts in the aviation, aerospace and nuclear industries...
Read More
-
3D printing is a flexible technology with less constraints on design. With the help of 3D printing technology, designers can realize complex design schemes such as lightweight structures and functional integrated structures. Many metal 3D printed parts require traditional machining processes such as milling and EDM to generate accurate surfaces. However, metal 3D printing technology often produces...
Read More
-
Many metal 3D printed metal parts need to be machined to produce a precise surface, but because metal 3D printed parts are often lightweight parts with complex geometric shapes, this brings challenges to subsequent machining. When machining metal 3D printed parts, it is necessary to consider whether the rigidity of 3D printing meets the requirements of machining, how to clamp these complicated met...
Read More
-
Nano tungsten trioxide WO3 has a large comparison area and significant surface effect. It is a good catalyst. It can be used as a main catalyst or an auxiliary catalyst, and has a high selectivity to the reaction. WO3 has a strong ability to absorb electromagnetic waves and can be used as an excellent solar energy absorbing material and recessive material. WO3 is an n-type semiconductor material w...
Read More
-
Nano bismuth trioxide Bi2O3 is an important functional material, which mainly exists in four crystal forms: α, β, γ and δ. Different crystal forms have different applications. The application of bismuth oxide is very wide. It is not only a good organic synthesis catalyst, ceramic coloring agent, plastic flame retardant, medicinal astringent, glass additives, high refractive glass and nuclear engin...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
