-
Iron nanopowder is black powder with a purity of over 99.9%, and can be divided into spherical and flake. Spherical nano iron powder Particle size 20-50nm, 50-70nm, 80-100nm, 100-200nm Application 1. Absorbing materials Metal nano-powders have a special absorption effect on electromagnetic waves. Iron, cobalt, zinc oxide powder and carbon-coated metal powder can be used as high-performance millime...
Read More
-
1) Characteristics of aluminum powder, Aluminum is a silver-gray metal, which is relatively divided and suitable for pigment aluminum powder. Aluminum powder paste is a mixture of pigment aluminum powder and solvent. Its uses and characteristics are roughly the same as aluminum powder. Due to the mass of 26.98, the relative density of 2.55, the purity of 99.5%, the melting point of aluminum is 685...
Read More
-
Flake aluminum powder is also known as aluminum powder pigment. Aluminum powder pigment is one of the important metal pigments. It is a high-purity (99.3%~99.97%) metal aluminum as raw material, which is produced by wet ball milling process. Compared with other pigments, aluminum powder pigments have their unique performance characteristics. Characteristics of flake aluminum powder 1) Covering cha...
Read More
-
Application of flake aluminum powder 1) Industrial coatings The industrial coatings market includes the following areas: can coatings, coil coatings, general industrial coatings, marine coatings, powder coatings, anti-corrosion coatings, roof coatings, etc. The three types of coatings with the largest amount of aluminum powder pigments are: roof coatings (increasing aesthetics, extending the...
Read More
-
After purchasing graphite, it may be necessary to check its concentration. The purity of graphite powder can be detected by the following four steps. 1. First, use an electronic analytical balance to accurately weigh two samples of 1 gram of graphite powder, put them into a double-covered porcelain crucible and a graphite boat of known weight, and bake them in a drying oven at 105°C to a constant ...
Read More
-
Read More
-
Alumina ceramics is a structural ceramic material with a-Al2O3 as the main crystal phase. Because of its high melting point, high hardness, heat resistance, corrosion resistance, and electrical insulation characteristics, it can be used under harsher conditions . The price of alumina ceramics is low, and the production process is mature. It is currently one of the ceramic materials with the larges...
Read More
-
Conductive glue is composed of non-conductive resin and conductive filler. Since epoxy resin has excellent mechanical and thermal properties, low shrinkage, good bonding ability, resistance to mechanical and thermal shock, and strong resistance to humidity, solvents and chemical reagents, epoxy resin The resin system conductive adhesive is the most researched. As the key material of conductive adh...
Read More
-
Copper powder is inexpensive and has a wide range of uses. Recently, many customers have inquired about copper powder, so how to choose copper powder? What kind of copper powder is more appropriate? The key is to look at the required performance and application. Commonly used copper powders can be roughly divided into spherical and quasi-spherical copper powders, dendritic copper powders, flake co...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
