-
In building energy conservation, the light transmission and heat insulation of glass is a very critical issue. In buildings with transparent ceilings and large-area exterior windows, the thermal radiation of sunlight will lead to an increase in the energy consumption of air conditioners, resulting in a large energy waste. In order to improve this phenomenon, nano-scale antimony doped tin oxide ATO...
Read More
-
In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
Read More
-
Infrared light has an obvious thermal effect, which can easily lead to an increase in ambient temperature. Ordinary architectural glass has no thermal insulation effect, and can only be achieved by means of filming. Therefore, architectural glass, car film, outdoor facilities and other surfaces need to use thermal insulation materials to achieve the effect of thermal insulation and energy saving. ...
Read More
-
The promotion and application of energy-saving technologies has reached a consensus in the world, and many countries have successively issued policies. In building energy consumption, a large proportion is lost through glass doors and windows. Similarly, in the hot summer, the exposure of sunlight through the car glass is unbearable for drivers and passengers, which accelerates the aging of the ve...
Read More
-
In the world of electronic materials there are two important material properties "electrical conductivity" and "thermal conductivity". Generally speaking, as long as the electrical conductivity of the material is good enough, the thermal conductivity is also good. For example, copper, silver, aluminum and other metal materials have good electrical and thermal conductivity. Therefore, most metal ma...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. Several preparation methods of nano-boron carbide (supply 100-200nm): 1. Carbothermal reduction method Be...
Read More
-
Nano WO3 has a large specific surface area and a significant surface effect, and is a good catalyst, which can be used as both a main catalyst and a co-catalyst, and has a high selectivity for the reaction. WO3 has a strong ability to absorb electromagnetic waves, and can be used as an excellent solar energy absorbing material and a recessive material. WO3 is an n-type semiconductor material with ...
Read More
-
Nano zinc oxide is a good vulcanization activator. Since nano-zinc oxide can be combined with rubber molecules at the molecular level, it can improve the performance of the rubber compound and improve the characteristics of the finished product. Take radial tires and other rubber products as examples. The use of nano-zinc oxide can significantly improve the thermal conductivity, wear resistance, t...
Read More
-
The application in plastics utilizes the high strength, high fluidity and small size effect of silica, which can improve the compactness, smoothness and wear resistance of plastic products. Through appropriate surface modification, the purpose of strengthening and toughening plastics can be achieved at the same time. By adding fumed silica into polyethylene, through a special method, the silica ca...
Read More
-
Due to the extremely strong surface activity of nano TiO2, it is easy to form large-sized agglomerates, which affects the practical application. Therefore, it can be modified from the aspects of improving the photocatalytic degradation efficiency of TiO2, changing the dielectric constant and surface activity of TiO2. There are two ways of combining surfactants with TiO2: one is physical adsorption...
Read More
-
Nano zinc oxide is a fine inorganic material with a particle size between 1nm and 100nm. Zinc oxide usually exists in the form of wurtzite, with four oxygen atoms surrounding the zinc ion, forming a thermodynamically stable tetrahedral structure. Due to the changes in the crystal structure and surface electronic structure of nano-zinc oxide, nano-zinc oxide has the characteristics of surface effec...
Read More
-
The formation of a stable dispersion system, in addition to using electrostatic repulsion, that is, the negative charges adsorbed on the surface of the particles repel each other, to prevent the adsorption/aggregation between particles and finally form large particles and stratify/settlement, but also use. The theory of the steric hindrance effect, whereby particles that have adsorbed negative cha...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
