-
(1) Black nano Fe3O4 iron oxide: Size: 30nm, PH: 8-10, SSA:4-5g/cm3 Black nano ferroferric oxide is a mixed valence oxide of iron with a melting point of 1597°C. It is insoluble in water but soluble in acid solutions. Vk-EF01 has anti-corrosion effect. For example, the bluing of steel parts (also known as blue-burning and baking blue) is to use the oxidation effect of alkaline oxidizing solution t...
Read More
-
Conductive glue is composed of non-conductive resin and conductive filler. Since epoxy resin has excellent mechanical and thermal properties, low shrinkage, good bonding ability, resistance to mechanical and thermal shock, and strong resistance to humidity, solvents and chemical reagents, epoxy resin The resin system conductive adhesive is the most researched. As the key material of conductive adh...
Read More
-
Copper powder is inexpensive and has a wide range of uses. Recently, many customers have inquired about copper powder, so how to choose copper powder? What kind of copper powder is more appropriate? The key is to look at the required performance and application. Commonly used copper powders can be roughly divided into spherical and quasi-spherical copper powders, dendritic copper powders, flake co...
Read More
-
Primary particle size parameters of nano copper oxide:20nm, 50nm, 100 nanometers, purity 99% Min. Application of nano copper oxide: 1. Nano copper oxide is an important multifunctional inorganic material, which is widely used in printing and dyeing, ceramics, glass and medicine and other fields. 2. Nano-copper oxide can also be used as a burning rate catalyst for rocket propellants. It can no...
Read More
-
Nanomaterials exhibit many exotic properties that traditional materials do not have. The first thing we need to know is that the nanometer (mainly refers to less than 100nm) of the composition of nanomaterials has four major effects: 1. Small size effect The boundary conditions of the crystal periodicity are destroyed; the atomic density near the surface layer of the amorphous nanoparticle decreas...
Read More
-
Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
Read More
-
Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
Read More
-
In pigments, nano sized iron oxide is also known as transparent iron oxide (through iron) . The so-called transparency, not specifically refers to the particles themselves macroscopically transparent, but refers to the pigment particles dispersed in the organic phase to make a film (or oil film) , when the light irradiation on the film, if the original direction does not change basically through t...
Read More
-
1.The application of nanometer iron oxide in ink material, The transparent iron yellow can be used for the coating of the outside of the can, the nanometer iron oxide red ink is red-gold color, it is especially suitable for the inside of the can, and the transparent iron red can resist the high temperature of 300 ° C, is a rare pigment in ink treasures. In order to improve the printing quality of ...
Read More
-
1. In the application of nano ferric oxide in magnetic materials and magnetic recording materials The size of magnetic particles as a magnetic recording unit must meet the following requirements: the length of particles should be smaller than the recording wavelength; The width of the particles (including possible lengths) should be much smaller than the recording depth; there should be as many ma...
Read More
-
The nano-chromium-nickel-iron alloy has several unique characteristics. Firstly, it has excellent magnetic properties that make it useful in applications where magnetism is necessary, such as electronic devices and MRI machines. Secondly, it has a high resistance to corrosion, making it ideal for use in various environments, including marine environments. Thirdly, it exhibits high strength and dur...
Read More
-
The preparation of SEM nano powder samples usually requires the following steps: Sample preparation Firstly, it is necessary to choose an appropriate sample preparation method. Usually there are physical methods, chemical methods, biological methods, mechanical methods, etc. Among them, the most common methods are magnetron sputtering, chemical reduction, aerosol, etc. Sample dispersion It is also...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
