-
With the rapid development of industry, a large number of pollutants are discharged into the environment, causing many environmental problems, such as soil, water and air pollution, which poses a great threat to the ecological environment and human health. In recent years, with the rise and development of nanotechnology, various nanomaterials have been widely used in the treatment of environmental...
Read More
-
Under the situation of rapid development of science and technology, to prepare high-temperature, high-performance, new-type materials, the first thing to do is to solve the refractory materials needed in the preparation process. The characteristics of refractory materials are as follows: 1. Mechanical properties The elastic modulus of special refractory materials is large. Most have higher mechani...
Read More
-
Application Analysis of Nano Tungsten Trioxide Nano WO3 yellow tungsten has a large specific surface area and significant surface effect. It is a good catalyst. It can be used as both a main catalyst and an auxiliary catalyst, and it has a high selectivity to the reaction. WO3 has a strong ability to absorb electromagnetic waves and can be used as an excellent solar energy absorbing material and r...
Read More
-
Copper powder is inexpensive and has a wide range of uses. Recently, many customers have inquired about copper powder, so how to choose copper powder? What kind of copper powder is more appropriate? The key is to look at the required performance and application. Commonly used copper powders can be roughly divided into spherical and quasi-spherical copper powders, dendritic copper powders, flake co...
Read More
-
Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
Read More
-
The displacement reaction method is a common process for processing silver-coated copper powder. Because the surface activity of copper powder is very large, it is easy to oxidize, so it must be pretreated before coating the copper powder. 1. Put the required amount of copper powder into the pretreatment tank, and then wash with 15% 30% dilute sulfuric acid to keep the pH of the solution at 3 2. W...
Read More
-
Density is a physical quantity that reflects the properties of matter. The properties of matter refer to a property that matter itself has but can be distinguished from each other. People often feel that substances with high density are "heavy" and substances with low density are "lighter". "Heavy" and "light" essentially refer to the magnitude of density. Density is a property of matter, it does ...
Read More
-
Nano ATO has excellent electrical and optical properties, and is widely used in coatings, plastics, textiles, polymer films, electronic products and other fields by virtue of its good electrical conductivity and antistatic properties. Nano ATO is much better than other antistatic materials, such as graphite, surfactant, metal powder, etc. The interaction of uniformly dispersed ato conductive nano ...
Read More
-
In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
Read More
-
Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
Read More
-
Nano thermal insulation coatings can be used to absorb ultraviolet rays from sunlight, and are often used in current decoration buildings. Water-based nano transparent thermal insulation coating not only has the effect of high efficiency and energy saving, but also has the comprehensive advantages of green environmental protection, health and safety. As an alternative product of solvent-based glas...
Read More
-
Infrared light has an obvious thermal effect, which can easily lead to an increase in ambient temperature. Ordinary architectural glass has no thermal insulation effect, and can only be achieved by means of filming. Therefore, architectural glass, car film, outdoor facilities and other surfaces need to use thermal insulation materials to achieve the effect of thermal insulation and energy saving. ...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
