-
1. Nano zinc oxide is an active agent and vulcanizing agent for rubber. Due to the small size effect and large surface effect of nano-materials, the function of nano-zinc oxide in rubber formulations is not only a high-active agent, but also improves wear resistance. It can improve the adhesive force of the rubber frame material, increase the deformation ability and reduce the heat generation and ...
Read More
-
Application Analysis of Nano Tungsten Trioxide Nano WO3 yellow tungsten has a large specific surface area and significant surface effect. It is a good catalyst. It can be used as both a main catalyst and an auxiliary catalyst, and it has a high selectivity to the reaction. WO3 has a strong ability to absorb electromagnetic waves and can be used as an excellent solar energy absorbing material and r...
Read More
-
Carbon nanotubes are simply classified according to the number of layers of graphene sheets: single-walled carbon nanotubes and multi-walled carbon nanotubes. The difference between the two is mainly reflected in: 1. Discover the time difference In 1991, when Li Ji-ma, an electron microscope expert in the Basic Research Laboratory of NEC Corporation, Japan, observed the C60 structure under a high-...
Read More
-
Nano sized hydroxyapatite has stable performance under physiological environment, and its ability to induce new bone formation is unmatched by other materials. It is widely used in human bone bionic regeneration materials and hydroxyapatite coatings. Bone is the stent of the human body, participates in the metabolism of the whole body, and is an important part of the human movement system. However...
Read More
-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
-
Dental restoration parts customization Solution 1. Personalized and complex geometric products are the areas where metal 3D printing technology is best at, ensuring a good match with the patient’s mouth, and the surface roughness of the parts is very suitable for the adhesion between the ceramic outer layer and the body 2. Cobalt-chromium alloy is used for printing materials, which has good biolog...
Read More
-
1. The history of nano gold powder development In 1885, nano gold solution was often used as the main ingredient in the treatment of alcoholism in the United States; In 1890, Dr. Koch discovered that Mycobacterium tuberculosis could not survive on the surface of gold; Nano gold was used to treat arthritis in 1890; In 1935, Chicago surgical expert Edward et al. discovered that nano-gold solution ca...
Read More
-
The singular properties of nanomaterials include: ①Surface effect The surface area of a spherical particle is proportional to the square of the diameter, and its volume is proportional to the cube of the diameter, so its specific surface area (surface area/volume) is inversely proportional to the diameter. As the particle diameter becomes smaller, the specific surface area will increas...
Read More
-
As a new material of the technological revolution, ceramic materials have attracted the attention of some developed countries as early as more than ten years ago. The fatal shortcomings of ceramic materials are its brittleness, low reliability and low repeatability. These shortcomings have seriously affected the application range of ceramic materials. Only by improving the fracture toughness of ce...
Read More
-
Aerospace super alloy parts processing solution 1. With traditional craftsmanship in aviation blade manufacturing and processing problems, metal 3D printing technology can solve the problem ingeniously 2. At the same time, under the premise of ensuring the function, the primary requirement of the lightweight aerospace industry for parts, metal 3D printing technology can easily realize the lightwei...
Read More
-
Conductive silver paste is a low-temperature baking conductive silver paste specially designed for resistive and capacitive touch screen circuits. It is made of high-performance resin and silver powder, with good conductivity, and the content of silver particles in the conductive silver paste. Metal silver particles are the main component of conductive silver paste, and the conductive properties o...
Read More
-
Cu is a transition metal and has a special electronic structure and electronic gain and loss properties that are different from other metals. It can show good catalysis for different chemical reactions and is widely used in the field of catalysts. When the size of CuO particles is as small as nanometers, due to the special characteristics of multiple surface free electrons and high surface energy ...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
