-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. Several preparation methods of nano-boron carbide (supply 100-200nm): 1. Carbothermal reduction method Be...
Read More
-
1 Modified high-strength new material Nano SiC powder particles have good compatibility in polymer composite materials, good dispersion and good basic bonding, the tensile strength of modified high-strength nylon alloy is more than 100% higher than that of ordinary PA6, and the wear resistance is improved by more than 2.5 times. Users have responded well. It is mainly used for polymer parts of arm...
Read More
-
Nano zirconia has important application value in national defense, electronics, high-temperature structural and functional ceramics, especially in high-tech fields such as surface coatings. The unique low thermal conductivity of nano-zirconia is an excellent material for thermal insulation coatings to improve the thermal insulation effect. Its high corrosion resistance, high hardness and high wear...
Read More
-
The application in plastics utilizes the high strength, high fluidity and small size effect of silica, which can improve the compactness, smoothness and wear resistance of plastic products. Through appropriate surface modification, the purpose of strengthening and toughening plastics can be achieved at the same time. By adding fumed silica into polyethylene, through a special method, the silica ca...
Read More
-
The formation of a stable dispersion system, in addition to using electrostatic repulsion, that is, the negative charges adsorbed on the surface of the particles repel each other, to prevent the adsorption/aggregation between particles and finally form large particles and stratify/settlement, but also use. The theory of the steric hindrance effect, whereby particles that have adsorbed negative cha...
Read More
-
The preparation methods of CNTS loaded metal nanoparticles are mainly physical preparation and chemical preparation methods. The most commonly used is chemical preparation method. The chemical preparation method is generally uniformly loaded with metal nanoparticles on the carrier CNTS. The general process of chemical preparation is that the metal front drive is restored to atoms, and the metal at...
Read More
-
In pigments, nano sized iron oxide is also known as transparent iron oxide (through iron) . The so-called transparency, not specifically refers to the particles themselves macroscopically transparent, but refers to the pigment particles dispersed in the organic phase to make a film (or oil film) , when the light irradiation on the film, if the original direction does not change basically through t...
Read More
-
1.The application of nanometer iron oxide in ink material, The transparent iron yellow can be used for the coating of the outside of the can, the nanometer iron oxide red ink is red-gold color, it is especially suitable for the inside of the can, and the transparent iron red can resist the high temperature of 300 ° C, is a rare pigment in ink treasures. In order to improve the printing quality of ...
Read More
-
Silicon nanowires (SiNW), as a novel one-dimensional nanomaterial with high specific surface area and high stability, have received attention and research in the field of sensors. With the optimization of the preparation process and diversification of modification methods of nanosilicon wires, biosensors using nanosilicon wires as carriers have been applied in various fields such as metal ion dete...
Read More
-
As a typical representative of one-dimensional nanomaterials, silicon nanowires not only possess the special properties of semiconductors, but also exhibit physical properties such as field emission, thermal conductivity, and visible photoluminescence that differ from bulk silicon materials. They have enormous potential application value in nanoelectronic devices, optoelectronic devices, and new e...
Read More
-
Nano metal powders have broad application prospects in fields such as electronics, magnetic materials, automotive industry, military industry, and powder metallurgy. For example, nano materials such as iron, aluminum, zinc, titanium, nickel, chromium, tantalum, cobalt, and so on have been produced. The most important factor in achieving optimal performance of nanometallic powders is the uniform di...
Read More
-
Nitrogen doped carbon nanotubes are a new type of nanomaterial with excellent physical and chemical properties, and have broad application prospects. First, nitrogen doped carbon nanotubes can be prepared by various methods, such as chemical vapor deposition, chemical vapor deposition arc discharge, electrochemical oxidation and reduction, sol gel method, etc. Among them, nitrogen doped carbon nan...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
