-
Aluminum nitride powder has high purity, uniform particle size, high surface activity, and the effect of insulation and thermal conductivity is very obvious. The powder can be applied to engineering plastics to improve the performance and mechanical strength of engineering plastics, and has good injection molding performance. Used in composite materials, it has good matching with semiconductor sil...
Read More
-
Nano titanium nitride (TiN) powder, black powder, cubic crystal type. The particle size is 20-40 nm, 100 nm. The purity is 99%+. Nano titanium nitride has high melting point, high hardness, high chemical stability and excellent electrical and thermal conductivity. The main application of nano titanium nitride: 1. Application in PET engineering plastics: A small amount of nano titanium nitride powd...
Read More
-
1. The lubricity of boron nitride Boron nitride came out more than 100 years ago. Its earliest application polymorph is hexagonal boron nitride as a high-temperature lubricant, abbreviated as: h-BN, or a-BN, or g-BN (that is, graphite boron nitride), Hexagonal boron nitride is absolutely smooth, and the friction coefficient between the powders is very low. Each layer of its atomic structure contai...
Read More
-
Many people think that graphite powder is carbon powder. In fact, there is still a big difference between graphite powder and carbon powder. Next, SAT NANO will introduce the difference between the two in detail; Toner generally refers to toner, which is widely used in printer cartridges. The main component of toner (also known as toner) is not carbon, but most of it is composed of resin and carbo...
Read More
-
Due to its small particles and large specific surface area, nano titanium nitride can be dispersed in other materials to form a conductive network, which greatly improves the conductive performance of the composite material. Therefore, nano-titanium nitride is a material with broad application prospects. Among them, the applications of nano-titanium nitride TIN in electrochemistry are as follows: ...
Read More
-
The following describes the application of nano TIN titanium nitride in water electrolysis: 1) Application in hydropower analysis hydrogen electrode Since solid polymer electrolyte water electrolysis is an acidic environment, alternative materials represented by N-based multi-element alloys are only suitable for neutral and alkaline environments. Nano TiN can be a good carrier material due to its ...
Read More
-
Carbon nanotubes are simply classified according to the number of layers of graphene sheets: single-walled carbon nanotubes and multi-walled carbon nanotubes. The difference between the two is mainly reflected in: 1. Discover the time difference In 1991, when Li Ji-ma, an electron microscope expert in the Basic Research Laboratory of NEC Corporation, Japan, observed the C60 structure under a high-...
Read More
-
In building energy conservation, the light transmission and heat insulation of glass is a very critical issue. In buildings with transparent ceilings and large-area exterior windows, the thermal radiation of sunlight will lead to an increase in the energy consumption of air conditioners, resulting in a large energy waste. In order to improve this phenomenon, nano-scale antimony doped tin oxide ATO...
Read More
-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
Infrared light has an obvious thermal effect, which can easily lead to an increase in ambient temperature. Ordinary architectural glass has no thermal insulation effect, and can only be achieved by means of filming. Therefore, architectural glass, car film, outdoor facilities and other surfaces need to use thermal insulation materials to achieve the effect of thermal insulation and energy saving. ...
Read More
-
The polymer film material has good processing and electrical insulation, and is widely used in various fields of industrial production and daily life. However, due to its high surface resistance, static electricity is easy to accumulate during use. When static electricity accumulates to a certain degree It will cause static vacuums, electric shock, and even adverse consequences such as fire and ex...
Read More