Search

Home

Search

  • 09

    Aug

    what is nitrogen doped carbon nanotubes powder

    Nitrogen doped carbon nanotubes are a new type of nanomaterial with excellent physical and chemical properties, and have broad application prospects. First, nitrogen doped carbon nanotubes can be prepared by various methods, such as chemical vapor deposition, chemical vapor deposition arc discharge, electrochemical oxidation and reduction, sol gel method, etc. Among them, nitrogen doped carbon nan...
    Read More
  • 13

    Oct

    What Nanomaterials can be used for Invisible Cloaks

    Invisible material refers to a material that can reduce or eliminate the reflection of light on the surface of an object, making it invisible or reducing its visibility. The principles of commonly used stealth materials currently include the following: The principle of refractive index control: By utilizing the difference between the refractive index of the material and the refractive index of the...
    Read More
  • 26

    Jan

    Understanding Dry and Wet Techniques for Nanomaterial Preparation

    Introduction: Nanotechnology is becoming increasingly important in many fields, from medicine to electronics. Nanomaterials, including nanoparticles, nanotubes, and nanowires, are essential components of many nanotechnology applications. Producing these materials requires specialized techniques, such as wet and dry methods. In this article, we will explore what dry and wet methods are, their benef...
    Read More
  • 11

    May

    An article on understanding the characteristics of carbon quantum dots

    Quantum dots (QDs) refer to semiconductor nanoparticles with a size smaller than the Bohr radius of the exciton and exhibiting quantum confinement effects. Due to the quantum confinement effect, the fluorescence emission of quantum dots is related to their diameter and chemical composition. By compounding with semiconductor surfaces, their optical and photochemical properties can be enhanced. Trad...
    Read More
  • 11

    May

    An article on the synthesis methods and applications of carbon quantum dots

    Synthesis of Carbon Quantum Dots The synthesis of carbon quantum dots can be mainly divided into two categories: top-down method and bottom-up method. Through the pre-treatment, preparation, and subsequent processing, carbon quantum dots can be controlled in size, passivated on the surface, doped with heteroatoms, and nanocomposites to meet the requirements. Top-down approach Top down method: lase...
    Read More
  • 29

    May

    Application of boron nitride lubricant in forging process

    In recent years, there has been a trend of oil-based lubricants being replaced by water-based lubricants. Boron nitride coatings are often used in forging nickel based alloys, high melting point alloys, and titanium machined parts, which not only provide lubrication but also prevent workpiece oxidation. Characteristics that forging lubricants should possess 1. Evenly moisten the surface to prevent...
    Read More
  • 14

    Jun

    Intragranular dispersion enhancement of carbon nanotubes in aluminum based composite materials

    Carbon nanotubes (CNTs) reinforced aluminum composites with unique intragranular dispersion were obtained using ultra short carbon nanotubes, and nanoscale carbon nanotubes were uniformly distributed within ultrafine aluminum grains. Compared with typical CNT/Al composite materials with intergranular carbon nanotube dispersion, this intragranular carbon nanotube/aluminum composite material has str...
    Read More
  • 26

    Dec

    How can surface modification improve the dispersion effect of powders?

    Powder surface modification changes the surface state of particles through physical or chemical means, with the core being to break the agglomeration force between particles. When the particle size of the powder decreases to the micrometer or nanometer level, the surface energy sharply increases, and van der Waals forces, hydrogen bonds, and other gravitational forces cause the particles to sponta...
    Read More
  • 27

    Mar

    Which powders need to be modified and what is the function of surface modification?

    Why modify the powder? Inorganic powders have hydrophilic and polar surfaces, but poor compatibility with organic matrices (plastics, rubber, resins). Direct use can lead to poor performance, so modification is necessary. (1) Improve dispersibility and prevent agglomeration. Inorganic powders with a large specific surface area are prone to agglomeration, which can lead to defects and a decrease in...
    Read More
  • 30

    Apr

    CNTs dispersion technology: from basic principles to applications

    Carbon nanotubes (CNTs), as typical one-dimensional nanomaterials, have shown great potential for applications in various fields such as energy storage, composite materials, biomedical, electronic devices, etc. due to their excellent mechanical properties (100 times higher than steel), outstanding conductivity, excellent thermal properties, and unique optical properties. However, the strong van de...
    Read More
  • 17

    Nov

    How Doping Concentration Affects Material Properties

    Which Content Does Doping Concentration Refer To? Doping introduces foreign elements to change the composition and properties of a host material, and the doping concentration describes a content measured against some chosen statistical base. In A1−xMxB, for instance, x is the fraction of the A/M sublattice occupied by M: x = 0.05 means that 5% of those sites are occupied by M, not 5% of all atoms....
    Read More
< 1 2 3
[  A total of  3  pages]
Leave a message Please click here for inquiry
Provide the right solution according to your needs,offer efficient service,leave a message for the product information and requirements you need,customize now!