-
Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
Read More
-
In the world of electronic materials there are two important material properties "electrical conductivity" and "thermal conductivity". Generally speaking, as long as the electrical conductivity of the material is good enough, the thermal conductivity is also good. For example, copper, silver, aluminum and other metal materials have good electrical and thermal conductivity. Therefore, most metal ma...
Read More
-
In the process of powder storage, transportation and use, it is often hoped that the nano-aluminum powder exhibits low activity and is less affected by external environmental factors (temperature, humidity, etc.), so that the product has stable performance for a long time. On the other hand, it is desirable to exhibit high activity in solid rocket propellants to obtain high energy release rate and...
Read More
-
The formation of a stable dispersion system, in addition to using electrostatic repulsion, that is, the negative charges adsorbed on the surface of the particles repel each other, to prevent the adsorption/aggregation between particles and finally form large particles and stratify/settlement, but also use. The theory of the steric hindrance effect, whereby particles that have adsorbed negative cha...
Read More
-
The preparation methods of CNTS loaded metal nanoparticles are mainly physical preparation and chemical preparation methods. The most commonly used is chemical preparation method. The chemical preparation method is generally uniformly loaded with metal nanoparticles on the carrier CNTS. The general process of chemical preparation is that the metal front drive is restored to atoms, and the metal at...
Read More
-
According to the pH range, the transparent dispersion of nano-silica can be divided into basic transparent dispersion of nano-silica (PH=8-11), neutral transparent dispersion of nano-silica (pH=6-8) and acidic transparent dispersion of nano-silica (pH=1-5). SAT NANO adopts a special process and dispersion process to prepare a series of nano-silica transparent dispersion products with good dispersi...
Read More
-
The main uses of nanomaterials: pharmaceuticals, household appliances, electronic computers, and the electronic industry, environmental protection, textile industry, and machinery industry. Nanotechnology is the core technology in the development of automobiles. Nanotechnology can be applied from car bodies to wheels, covering almost all of cars. The widespread application of nanotechnology in aut...
Read More
-
Nano metal powders have broad application prospects in fields such as electronics, magnetic materials, automotive industry, military industry, and powder metallurgy. For example, nano materials such as iron, aluminum, zinc, titanium, nickel, chromium, tantalum, cobalt, and so on have been produced. The most important factor in achieving optimal performance of nanometallic powders is the uniform di...
Read More
-
1. Mechanical properties Due to the fact that nanomaterials are composed of nanoparticles, and when the particles are at the nanoscale, the strength, hardness, and other mechanical properties of the material will increase as the particle size decreases. It is precisely because of this property of nanomaterials that they can be used for certain packaging that requires strength and hardness, solving...
Read More
-
The preparation of SEM nano powder samples usually requires the following steps: Sample preparation Firstly, it is necessary to choose an appropriate sample preparation method. Usually there are physical methods, chemical methods, biological methods, mechanical methods, etc. Among them, the most common methods are magnetron sputtering, chemical reduction, aerosol, etc. Sample dispersion It is also...
Read More
-
There are several methods to improve the flowability of powder during transportation: The particle shape of the powder can be controlled by changing the operating conditions during the grinding or spray drying process to affect its fluidity. Powder can be added with flowability additives, such as granular substances such as silica or alumina, to improve its flowability. For powders that are diffic...
Read More
-
Measuring the thickness of the coating layer in nanoparticles requires the use of advanced instruments and techniques. The following are possible measurement methods: Transmission Electron Microscope (TEM): This is a microscope that utilizes high-density electron beams to observe and measure the structure and properties of nanoparticles. For the measurement of the thickness of the coating layer, T...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
