-
Production process steps of zirconium powder and hafnium powder: Zirconium sponge, hafnium sponge → hydrogenation → crushing → sieving → dehydrogenation → crushing → sieving → mixed inspection → batch batch → vacuum packaging, immersion bottled → factory sales SAT NANO can supply the zirconium powder and hafnium powder with different particle, if you have any enquiry, please contact us at admin@sa...
Read More
-
As we know the tio2 nanopowder has photocatalytic and antibacterial, specially the 5nm, it is very good for antibacterial. We can supply the tio2 5nm specification as below, Part No. Particle Purity (%) SSA (m2/g) Bulk density (g/cm3) Density (g/cm3) Crystal Color OP2208B-5nm 5nm 99.9 220 0.25 3.9 anastase white Photocatalyst antibacterial principle: After being exposed to visible light, photocata...
Read More
-
Nano titanium dioxide powder for cosmetics has many excellent properties, such as safe and non-toxic, can shield ultraviolet rays, high decolorization power (or coloring power), strong hiding power or transparency, good hue, wide color spectrum, etc. The favor of the artist has become the most important and the largest amount of inorganic additives in high-end cosmetics. The following will introdu...
Read More
-
Nano oxides have many unique properties and have been widely used in textile fields such as antibacterial, deodorant, and ultraviolet protection. Similarly, nano-oxides have a positive effect on anti-wrinkle finishing. Nano-titanium dioxide or nano-silica is added to the traditional system to form nano-oxide anti-wrinkle finishing liquid through high-speed shearing, so that the fabric has anti-wri...
Read More
-
Nano titanium nitride (TiN) powder, black powder, cubic crystal type. The particle size is 20-40 nm, 100 nm. The purity is 99%+. Nano titanium nitride has high melting point, high hardness, high chemical stability and excellent electrical and thermal conductivity. The main application of nano titanium nitride: 1. Application in PET engineering plastics: A small amount of nano titanium nitride powd...
Read More
-
As a product with a wide range of performance, high temperature alumina can be used in many different industries, including the application in catalysts. However, in order to achieve the specified use standard, it can be carried out according to the operations specified below. 1. Adsorbents: This type of carrier is a porous substance with a large specific surface area. High temperatur...
Read More
-
The role of metals aluminum in refractory materials: Plastic phase forming: The metal lattice will slip under the action of stress, which has plastic characteristics. Compared with the hard inorganic material particles, it will play the plastic forming characteristics during the forming process, so that the same The density of the green body prepared under the forming pressure is higher than that ...
Read More
-
Flake aluminum powder is also known as aluminum powder pigment. Aluminum powder pigment is one of the important metal pigments. It is a high-purity (99.3%~99.97%) metal aluminum as raw material, which is produced by wet ball milling process. Compared with other pigments, aluminum powder pigments have their unique performance characteristics. Characteristics of flake aluminum powder 1) Covering cha...
Read More
-
Because of its low density, good oxidation resistance, high temperature resistance and corrosion resistance, silicon carbide has promoted the development of silicon carbide in the field of brake pads. Silicon carbide composite material is a material that can meet the high temperature of 1650-1700 ℃. Adding silicon carbide powder in the production of brake pads can more effectively improve the stab...
Read More
-
In recent years, metal 3D printing has become the fastest growing and one of the most promising technologies. It has been successfully applied to aircraft engine parts, medical implants, auto parts, aviation satellite components and other fields, as well as metal 3D printing equipment and applications in China. There are also breakthroughs. SAT NANO has independently researched and developed a ser...
Read More
-
1. Titanium carbide tool materials AL2O3-TIC ceramics is the earliest development of composite ceramic tool system. Hard particles of nano-titanium carbide with a mass fraction of 15-40% are dispersed in the matrix, which not only improves the hardness of the material, but also improves the fracture toughness of the material. The cutting performance of the composite AL2O3-TIC ceramic tool is much ...
Read More
-
3D printing is a flexible technology with less constraints on design. With the help of 3D printing technology, designers can realize complex design schemes such as lightweight structures and functional integrated structures. Many metal 3D printed parts require traditional machining processes such as milling and EDM to generate accurate surfaces. However, metal 3D printing technology often produces...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
