13929258449
Nano silica powder is a filler for reinforcing high-temperature vulcanized silicone rubber. The silica nanopowder aggregates have a good reinforcing effect on the silicone rubber. After adding SAT NANO nano silica powder to the rubber, a microcrystalline region with silica as a nucleus is formed, which increases the physical cross-linking point. Crystallization is more likely to occur and the strength of the rubber can be increased.
The specification of SiO2 nanoparticle as below,
Appearance: White powder
Size: 10-30nm
SSA:200+-50m2/g
Purity:>=99.8%
PH value: 3.5-4.5
Application characteristics of nano silica powder in rubber:
As a reinforcing agent and anti-aging agent, SAT NANO silica nanopowder is used in rubber products to improve the strength of rubber products, improve toughness and wear resistance, anti-aging, anti-friction ignition, and extend life.
The reinforcing effect of silica nanopowder on silicone rubber is affected by its particle size, specific surface area and structure. Generally, the smaller the particle size, the larger the specific surface area, the higher the structure, the better the reinforcing performance, and the vulcanized rubber. The higher the strength and hardness.
Recommended amount of nano silica powder:
Silicone rubber: 3.0-10%; Pressure sensitive adhesive: 0.1-5%;
Polyurethane: 3.0-25%; Acrylates: 0.5-3.5%
The user should determine the amount of addition according to different systems.
How to use nano silica powder:
According to the formula ratio, the raw rubber, hydroxy silicone oil and SAT NANO silica nanopowder are kneaded uniformly on the double-roll mill, the rubber mixture is thinned out, and the heat treatment is carried out at 170 ° C for 2 h, and the vulcanizing agent is added and refined. The film was molded on the vulcanizer the next day. The vulcanization conditions were 175 ° C × t90. T90 is a positive vulcanization time of the vulcanizate measured by an LH-90 vulcanizer.
When adding SAT NANO silicon oxide nanopowder to rubber, attention must be paid to its dispersion in the polymer.
The degree of dispersion of silicon nanoparticle in the system has a great influence on the properties of rubber. In the transparent compound system, the higher the transparency, the better the dispersion of SiO2 nanoparticle.
SAT nano Technology Material Co., Ltd. is aimed at spreading the nano and micron technology, we can supply silicon oxide nanopowder 10-30nm for customer to do different application. Welcome to send us your enquiry.