-
The value of nanomaterials is not only limited to its good performance in the information industry, biomedicine, aerospace and environmental protection, etc., but also that it can go deep into the details of life, and through the transformation of traditional manufacturing, it will have a subtle impact on human clothing, food, housing and transportation. Materials are the material basis for all te...
Read More
-
Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
Read More
-
Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
Read More
-
In building energy conservation, the light transmission and heat insulation of glass is a very critical issue. In buildings with transparent ceilings and large-area exterior windows, the thermal radiation of sunlight will lead to an increase in the energy consumption of air conditioners, resulting in a large energy waste. In order to improve this phenomenon, nano-scale antimony doped tin oxide ATO...
Read More
-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
Nano thermal insulation coatings can be used to absorb ultraviolet rays from sunlight, and are often used in current decoration buildings. Water-based nano transparent thermal insulation coating not only has the effect of high efficiency and energy saving, but also has the comprehensive advantages of green environmental protection, health and safety. As an alternative product of solvent-based glas...
Read More
-
The preparation of SEM nano powder samples usually requires the following steps: Sample preparation Firstly, it is necessary to choose an appropriate sample preparation method. Usually there are physical methods, chemical methods, biological methods, mechanical methods, etc. Among them, the most common methods are magnetron sputtering, chemical reduction, aerosol, etc. Sample dispersion It is also...
Read More
-
Measuring the thickness of the coating layer in nanoparticles requires the use of advanced instruments and techniques. The following are possible measurement methods: Transmission Electron Microscope (TEM): This is a microscope that utilizes high-density electron beams to observe and measure the structure and properties of nanoparticles. For the measurement of the thickness of the coating layer, T...
Read More
-
The surface coating treatment of ultrafine powder is a very useful technology, which can improve the flow performance of the powder, reduce dust flying, improve stability and moisture resistance, and enhance the solubility of the powder. The commonly used surface coating treatment methods for ultrafine powders include the following: Wet surface treatment: The coating material is added in liquid fo...
Read More
-
With the increasing demand for the performance and lifespan of mechanical equipment, the application of self-lubricating materials in the industrial field is becoming increasingly widespread. Nanomaterials play an important role in the manufacturing of self-lubricating materials due to their excellent physical properties. So, which nanomaterials can be used for the manufacturing of self-lubricatin...
Read More
-
In recent years, there has been a trend of oil-based lubricants being replaced by water-based lubricants. Boron nitride coatings are often used in forging nickel based alloys, high melting point alloys, and titanium machined parts, which not only provide lubrication but also prevent workpiece oxidation. Characteristics that forging lubricants should possess 1. Evenly moisten the surface to prevent...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
