13929258449

admin@satnano.com

Search

Home

Search

  • 29

    Dec

    Analysis of the advantages and disadvantages of the replacement reaction process and the preparation of silver coated copper powder

    The displacement reaction method is a common process for processing silver-coated copper powder. Because the surface activity of copper powder is very large, it is easy to oxidize, so it must be pretreated before coating the copper powder. 1. Put the required amount of copper powder into the pretreatment tank, and then wash with 15% 30% dilute sulfuric acid to keep the pH of the solution at 3 2. W...
    Read More
  • 14

    Jan

    Nano cuprous oxide Cu2O-a standout in the field of high-end antibacterial

    Nano cuprous oxide Cu2O is a kind of photoelectric material with a wide range of uses. The main uses are as follows: Nano cuprous oxide Cu2O is used as anti-fouling primer for ships in the coating industry to prevent marine organisms from adhering to the bottom of ships; Nano cuprous oxide Cu2O is used as a colorant for red glass and red enamel in the glass and ceramic industries; Nano cuprous oxi...
    Read More
  • 04

    Mar

    Silver coated copper powder is widely used, and chemical composite method is the mainstream process for preparation

    In recent years, silver coated copper powder has been widely used, not only as the electrode of chip electronic components, but also in the fields of catalyst and electronic paste. At present, the electronic paste used in my country is basically micron-level pure silver powder, which is expensive and mainly imported. Micron sterling silver powder has the problem of particle sedimentation in the la...
    Read More
  • 04

    Mar

    What is the common uses of nano copper oxide powder

    Primary particle size parameters of nano copper oxide:20nm, 50nm, 100 nanometers, purity 99% Min. Application of nano copper oxide: 1. Nano copper oxide is an important multifunctional inorganic material, which is widely used in printing and dyeing, ceramics, glass and medicine and other fields. 2. Nano-copper oxide can also be used as a burning rate catalyst for rocket propellants. It can no...
    Read More
  • 04

    Mar

    Silver plated copper powder can be widely used in conductive adhesives, conductive coatings, polymer pastes

    The silver plated copper powder adopts electroless plating technology to form silver plating with different thicknesses on the surface of ultra-fine copper powder and nickel powder; it has good oxidation resistance, good electrical conductivity, low resistivity, high dispersion and high stability. Silver plated copper powder is an ideal conductive powder and is an ideal material for low cost and h...
    Read More
  • 14

    Apr

    Various densities of powders (bulk density, tap density, true density, apparent density, bulk density and bulk density)

    Density is a physical quantity that reflects the properties of matter. The properties of matter refer to a property that matter itself has but can be distinguished from each other. People often feel that substances with high density are "heavy" and substances with low density are "lighter". "Heavy" and "light" essentially refer to the magnitude of density. Density is a property of matter, it does ...
    Read More
  • 14

    Apr

    How to effectively control the agglomeration of nanoparticle powders

    Nanoparticles have a special surface structure, which lacks adjacent coordinating atoms on the surface, and has high activity, so it is easy to agglomerate. Due to the strong self-absorption property among nanomaterial particles, the agglomeration of nanoparticles is inevitable. Aggregates can be divided into two types: hard agglomerates and soft agglomerates. The formation process of agglomerates...
    Read More
  • 14

    Apr

    The melting point of thermal properties of nanoparticles

    The thermal properties of nanomaterials are inseparably linked to the motion behavior of molecules and atoms in the material. such as the melting point of nanomaterials. The melting point of a solid substance is fixed when its form is large in size. For nanoparticles, due to the small particles, the high surface energy of the particles, the large number of surface atoms, the incomplete coordinatio...
    Read More
  • 19

    Apr

    What are the influencing factors of nano powder particle size test?

    Particle size: The size of the particles is called particle size, usually the particle size of spherical particles is expressed by diameter/particle size, and the particle size of cubic particles is expressed by side length. Particle size is the diameter of a particle. However, most of the particles in practice are irregular. Therefore, in order to describe the size of the particles more convenien...
    Read More
  • 19

    Apr

    What will be the important terms of the nano powder industry

    Nanomaterials exhibit many exotic properties that traditional materials do not have. The first thing we need to know is that the nanometer (mainly refers to less than 100nm) of the composition of nanomaterials has four major effects: 1. Small size effect The boundary conditions of the crystal periodicity are destroyed; the atomic density near the surface layer of the amorphous nanoparticle decreas...
    Read More
  • 19

    Apr

    What is the meaning of ultrafine powder particle size distribution D10, D50, D90, D97

    The size of the particles is called the particle size of the particles, which may also be referred to as particle size. Particle size or particle size refers to particle diameter. Of course, for non-spherical particles, the particle size is related to the measurement criteria and statistical methods, and the particle size can only be "equivalent". The percentage (or cumulative percentage) of parti...
    Read More
  • 19

    Apr

    What will be the dispersion technology and method of ultrafine powder in liquid medium

    In order to obtain the correct data of the primary particle size, it is often necessary to open the agglomerated particles in the particle size test to form a particle monomer and keep it uniformly dispersed in the medium. This operation is called "dispersion". The requirement of the laser particle size analyzer for the dispersion system is "dispersion without segregation". Dispersion techniques a...
    Read More
< 11 12 13 14 15 16 17 >
[  A total of  17  pages]
Leave a message Please click here for inquiry
Provide the right solution according to your needs,offer efficient service,leave a message for the product information and requirements you need,customize now!