-
First, capsule modification Capsule modification is a surface modification method in which a film of a uniform thickness and a film having a certain thickness is coated on the surface of the powder particles. Rong et al. encapsulated TiO2 composite particles coated with Al2O3 and SiO2 with polystyrene, which effectively improved the absorbance and stability of the material. Zhu Liqun and other met...
Read More
-
Nano silica dispersion, silicon oxide dispersion is translucent liquid, mainly used in coatings, refractory materials, textile industry, etc., with water resistance, fire resistance, scrub resistance, stain resistance. After the nano-silica is dispersed into a liquid, the appearance varies from white milky to colorless and transparent according to different dispersion systems. After the nano-silic...
Read More
-
Nano titanium dioxide transparent dispersion adopts international advanced dispersion technology to disperse nano-titanium dioxide powder (5-30nm) in aqueous phase medium to form highly dispersed, uniform and stable nano-titanium dioxide aqueous transparent dispersion. In addition to the characteristics of nanometer titanium dioxide transparent dispersions, nanometer titanium dioxide transparent d...
Read More
-
Nano alumina water dispersion is our company adopts international advanced dispersion technology to disperse nano-alumina powder (20-30nm) in water phase medium to form highly dispersed, homogenized and stabilized nano-alumina water dispersion. liquid. In addition to the characteristics of aluminum oxide water dispersion, nano alumina water dispersion has the characteristics of higher activity and...
Read More
-
Efficacy of nano silver: With its properties of inhibiting bacterial protein synthesis, silver ions achieve the purpose of inhibiting bacteria and effectively prevent itching caused by bacteria. Nano silver dipsersion material characteristics: 1.Broad spectrum antibacterial Nano-silver acts on cell membrane proteins, which can directly destroy the binding of bacterial cell membranes to oxygen meta...
Read More
-
What is a thermally conductive gel? Thermally conductive gel: It has some advantages of thermally conductive silicone sheet and thermally conductive silicone grease, while making up for some of the weaknesses of the two; strong plasticity, can fill uneven interfaces. What are the advantages of thermal gel? 1. Efficient thermal conductivity; 2. Low compressive force application and low stress; 3. H...
Read More
-
As a product with a wide range of performance, high temperature alumina can be used in many different industries, including the application in catalysts. However, in order to achieve the specified use standard, it can be carried out according to the operations specified below. 1. Adsorbents: This type of carrier is a porous substance with a large specific surface area. High temperatur...
Read More
-
Nano particles are used in automotive coatings due to their special effects, which can improve the traditional performance of coatings and give them new functions, greatly improving product quality, and providing new opportunities for improving the technical content of automotive coatings. 1. Anti-scratch and stone-strike nano automotive coatings The surface of the car body is often scratched by m...
Read More
-
Objective: To prepare a polishing slurry of α-Al2O3 nanoparticles with good dispersion stability; to improve the chemical mechanical polishing performance of sapphire; Disperse α-Al2O3 in different dispersing media such as silica sol, cerium oxide sol, water, etc.; prepare a polishing slurry of α-Al2O3 nanoparticles under conditions of different pH, different silica sol concentration and silica so...
Read More
-
1. The history of nano gold powder development In 1885, nano gold solution was often used as the main ingredient in the treatment of alcoholism in the United States; In 1890, Dr. Koch discovered that Mycobacterium tuberculosis could not survive on the surface of gold; Nano gold was used to treat arthritis in 1890; In 1935, Chicago surgical expert Edward et al. discovered that nano-gold solution ca...
Read More
-
In order to obtain the correct data of the primary particle size, it is often necessary to open the agglomerated particles in the particle size test to form a particle monomer and keep it uniformly dispersed in the medium. This operation is called "dispersion". The requirement of the laser particle size analyzer for the dispersion system is "dispersion without segregation". Dispersion techniques a...
Read More
-
Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
Read More