-
Copper oxide powder is a brown-black metal oxide powder with a wide range of uses. Copper oxide is a multifunctional fine inorganic material with a wide range of uses, mainly used in the fields of printing and dyeing, glass, ceramics, medicine and catalysis. It can be used as a catalyst and catalyst carrier and electrode activation material, and also as a rocket propellant. As the main component o...
Read More
-
Primary particle size parameters of nano copper oxide:20nm, 50nm, 100 nanometers, purity 99% Min. Application of nano copper oxide: 1. Nano copper oxide is an important multifunctional inorganic material, which is widely used in printing and dyeing, ceramics, glass and medicine and other fields. 2. Nano-copper oxide can also be used as a burning rate catalyst for rocket propellants. It can no...
Read More
-
Nanomaterials exhibit many exotic properties that traditional materials do not have. The first thing we need to know is that the nanometer (mainly refers to less than 100nm) of the composition of nanomaterials has four major effects: 1. Small size effect The boundary conditions of the crystal periodicity are destroyed; the atomic density near the surface layer of the amorphous nanoparticle decreas...
Read More
-
Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
Read More
-
Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
Read More
-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
In the process of powder storage, transportation and use, it is often hoped that the nano-aluminum powder exhibits low activity and is less affected by external environmental factors (temperature, humidity, etc.), so that the product has stable performance for a long time. On the other hand, it is desirable to exhibit high activity in solid rocket propellants to obtain high energy release rate and...
Read More
-
The preparation of SEM nano powder samples usually requires the following steps: Sample preparation Firstly, it is necessary to choose an appropriate sample preparation method. Usually there are physical methods, chemical methods, biological methods, mechanical methods, etc. Among them, the most common methods are magnetron sputtering, chemical reduction, aerosol, etc. Sample dispersion It is also...
Read More
-
Aluminum powder is a commonly used filler, widely used in fields such as thermal interface materials and industrial coatings. However, traditional aluminum powder has problems such as high viscosity, poor dispersibility, and poor thermal stability, which limit its effectiveness in some special applications. To address these issues, researchers have carried out many modification methods to improve ...
Read More
-
In recent years, there has been a trend of oil-based lubricants being replaced by water-based lubricants. Boron nitride coatings are often used in forging nickel based alloys, high melting point alloys, and titanium machined parts, which not only provide lubrication but also prevent workpiece oxidation. Characteristics that forging lubricants should possess 1. Evenly moisten the surface to prevent...
Read More
-
Carbon nanotubes (CNTs) reinforced aluminum composites with unique intragranular dispersion were obtained using ultra short carbon nanotubes, and nanoscale carbon nanotubes were uniformly distributed within ultrafine aluminum grains. Compared with typical CNT/Al composite materials with intergranular carbon nanotube dispersion, this intragranular carbon nanotube/aluminum composite material has str...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
