Why modify the powder? Inorganic powders have hydrophilic and polar surfaces, but poor compatibility with organic matrices (plastics, rubber, resins). Direct use can lead to poor performance, so modification is necessary. (1) Improve dispersibility and prevent agglomeration. Inorganic powders with a large specific surface area are prone to agglomeration, which can lead to defects and a decrease in...
Read More
This guide provides a comprehensive technical framework for utilizing magnetite (Fe3O4) nanopowder as a functional filler to formulate industrial protective coatings with superior antistatic and electromagnetic shielding properties. It specifically addresses critical engineering challenges such as nanoparticle agglomeration, sedimentation, percolation threshold optimization, and coating adhesion. ...
Read More
1. Intrinsic Color: Black Bulk (micron-scale) pure Fe3O4(Magnetite) appears deep black under visible light. Reason: Fe3O4 is a narrow-bandgap semiconductor (bandgap ≈0.1≈0.1 eV), which absorbs light across the entire visible spectrum with virtually no reflection, resulting in a pure black appearance. Industrial products: Larger-particle Fe3O4powders (micron-scale...
Read More
Scope: determination of Fe content/purity and impurity elements (Na, K, Ca, Mg, Al, Si, Mn, Cu, Pb, Cd, Cr, Ni, Zn, As, etc.) Instrumentation: ICP-OES (major Fe + common impurities, ppm level) / ICP-MS (trace impurities, ppb level) 1. Method Overview ICP-OES (Inductively Coupled Plasma – Optical Emission Spectrometry): major Fe content + common impurities (0.001%–100%), fast and cost-effective ICP...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
