-
1 Zirconium carbide is used in cemented carbide Zirconium carbide is an important high-temperature structural material with high melting point, high strength and corrosion resistance. It can improve the strength and corrosion resistance of cemented carbide. Its excellent characteristics make it have a lot of application space in cemented carbide. Using zirconium carbide instead of expensive tantal...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, and the performance of β type is better than that of α type. Type β has ...
Read More
-
The beta silicon carbide whiskers produced by SAT NANO are needle-shaped cubic crystals. As an atomic crystal, it has low density, high melting point, high strength, high modulus, low thermal expansion rate, and excellent properties such as wear resistance, corrosion resistance, high temperature resistance, and oxidation resistance. It is mainly used for metal substrates and ceramic substrates. , ...
Read More
-
As a new material of the technological revolution, ceramic materials have attracted the attention of some developed countries as early as more than ten years ago. The fatal shortcomings of ceramic materials are its brittleness, low reliability and low repeatability. These shortcomings have seriously affected the application range of ceramic materials. Only by improving the fracture toughness of ce...
Read More
-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. It has a Mohs hardness of about 9.5. Black glossy crystals. The hardness is lower than that of industrial...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. Several preparation methods of nano-boron carbide (supply 100-200nm): 1. Carbothermal reduction method Be...
Read More
-
1 Modified high-strength new material Nano SiC powder particles have good compatibility in polymer composite materials, good dispersion and good basic bonding, the tensile strength of modified high-strength nylon alloy is more than 100% higher than that of ordinary PA6, and the wear resistance is improved by more than 2.5 times. Users have responded well. It is mainly used for polymer parts of arm...
Read More
-
Nano zirconia has important application value in national defense, electronics, high-temperature structural and functional ceramics, especially in high-tech fields such as surface coatings. The unique low thermal conductivity of nano-zirconia is an excellent material for thermal insulation coatings to improve the thermal insulation effect. Its high corrosion resistance, high hardness and high wear...
Read More
-
Silicon carbide particle reinforced aluminum matrix composite material, abbreviated as SiCp/Al composite material, refers to the addition of silicon carbide particles (SiCp) to aluminum matrix alloys to form a composite material with high strength, high stiffness, and high heat resistance. This composite material has been widely used in fields such as aerospace, shipbuilding, vehicles, electronic ...
Read More
-
With the continuous progress of technology, the application of thermal conductive nanomaterials in modern industry is becoming increasingly widespread. From electronic devices to the automotive industry, their use has become an industry standard in today's high-tech field. As a company specializing in the production of thermal conductive nanomaterials, Dongguan SAT NANO understands the importance ...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
