-
1.Lithium battery The development of conductive materials is one of the elements in the development of new energy. Carbon nanotubes can be used to improve the electrical conductivity of electrode materials, and the improvement of the conductivity of electrode materials (anode and cathode) is important for improving energy storage performance. Carbon nanotubes have very good electrical conductivity...
Read More
-
Nano silica dispersion, silicon oxide dispersion is translucent liquid, mainly used in coatings, refractory materials, textile industry, etc., with water resistance, fire resistance, scrub resistance, stain resistance. After the nano-silica is dispersed into a liquid, the appearance varies from white milky to colorless and transparent according to different dispersion systems. After the nano-silic...
Read More
-
Nano titanium dioxide transparent dispersion adopts international advanced dispersion technology to disperse nano-titanium dioxide powder (5-30nm) in aqueous phase medium to form highly dispersed, uniform and stable nano-titanium dioxide aqueous transparent dispersion. In addition to the characteristics of nanometer titanium dioxide transparent dispersions, nanometer titanium dioxide transparent d...
Read More
-
Nano alumina water dispersion is our company adopts international advanced dispersion technology to disperse nano-alumina powder (20-30nm) in water phase medium to form highly dispersed, homogenized and stabilized nano-alumina water dispersion. liquid. In addition to the characteristics of aluminum oxide water dispersion, nano alumina water dispersion has the characteristics of higher activity and...
Read More
-
Efficacy of nano silver: With its properties of inhibiting bacterial protein synthesis, silver ions achieve the purpose of inhibiting bacteria and effectively prevent itching caused by bacteria. Nano silver dipsersion material characteristics: 1.Broad spectrum antibacterial Nano-silver acts on cell membrane proteins, which can directly destroy the binding of bacterial cell membranes to oxygen meta...
Read More
-
1. The history of nano gold powder development In 1885, nano gold solution was often used as the main ingredient in the treatment of alcoholism in the United States; In 1890, Dr. Koch discovered that Mycobacterium tuberculosis could not survive on the surface of gold; Nano gold was used to treat arthritis in 1890; In 1935, Chicago surgical expert Edward et al. discovered that nano-gold solution ca...
Read More
-
In order to obtain the correct data of the primary particle size, it is often necessary to open the agglomerated particles in the particle size test to form a particle monomer and keep it uniformly dispersed in the medium. This operation is called "dispersion". The requirement of the laser particle size analyzer for the dispersion system is "dispersion without segregation". Dispersion techniques a...
Read More
-
Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
Read More
-
The preparation methods of CNTS loaded metal nanoparticles are mainly physical preparation and chemical preparation methods. The most commonly used is chemical preparation method. The chemical preparation method is generally uniformly loaded with metal nanoparticles on the carrier CNTS. The general process of chemical preparation is that the metal front drive is restored to atoms, and the metal at...
Read More
-
According to the pH range, the transparent dispersion of nano-silica can be divided into basic transparent dispersion of nano-silica (PH=8-11), neutral transparent dispersion of nano-silica (pH=6-8) and acidic transparent dispersion of nano-silica (pH=1-5). SAT NANO adopts a special process and dispersion process to prepare a series of nano-silica transparent dispersion products with good dispersi...
Read More
-
Nano metal powders have broad application prospects in fields such as electronics, magnetic materials, automotive industry, military industry, and powder metallurgy. For example, nano materials such as iron, aluminum, zinc, titanium, nickel, chromium, tantalum, cobalt, and so on have been produced. The most important factor in achieving optimal performance of nanometallic powders is the uniform di...
Read More
-
Nitrogen doped carbon nanotubes are a new type of nanomaterial with excellent physical and chemical properties, and have broad application prospects. First, nitrogen doped carbon nanotubes can be prepared by various methods, such as chemical vapor deposition, chemical vapor deposition arc discharge, electrochemical oxidation and reduction, sol gel method, etc. Among them, nitrogen doped carbon nan...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
