Class I and Class II materials are two fundamental concepts in the field of materials science, which are used to describe the crystal structure types of materials and are often applied in the research of materials such as semiconductors and metals. So, how do we distinguish between Class I materials and Class II materials? A simple method is to distinguish based on the density of the material. Com...
Read More
With the continuous development of nanotechnology, nano metal ultrafine powders have been increasingly widely used. However, during storage and transportation, nano metal ultrafine powders also face some problems, such as poor thermal stability and easy oxidation and heating. Therefore, we must take some measures to ensure the safe storage and transportation of nano metal ultrafine powders. In ord...
Read More
Synthesis of Carbon Quantum Dots The synthesis of carbon quantum dots can be mainly divided into two categories: top-down method and bottom-up method. Through the pre-treatment, preparation, and subsequent processing, carbon quantum dots can be controlled in size, passivated on the surface, doped with heteroatoms, and nanocomposites to meet the requirements. Top-down approach Top down method: lase...
Read More
What are the surface modification methods for alumina powder? Aluminum oxide, a common material, is commonly used in the production of ceramics, coatings, catalysts, etc. However, in some applications, such as filling composite materials or preparing high-performance catalysts, surface modification of alumina is required to improve its performance and stability. This article will discuss the surfa...
Read More
Aluminum powder is a commonly used filler, widely used in fields such as thermal interface materials and industrial coatings. However, traditional aluminum powder has problems such as high viscosity, poor dispersibility, and poor thermal stability, which limit its effectiveness in some special applications. To address these issues, researchers have carried out many modification methods to improve ...
Read More
The preparation method is one of the key factors affecting the specific surface area of oxide powders. Different preparation methods can lead to differences in the size, shape, and porosity of powder particles, thereby affecting their specific surface area. For example, the sol gel method can prepare oxide powders with high specific surface area, uniform particle size and fine size; The co precipi...
Read More
There are different types of 3D printing according to different materials, among which metal powder is one of the main raw materials for 3D printing, and high-purity metal powder needs to be used as the raw material. The relevant parameters of the powder, such as chemical composition, particle shape, particle size and distribution, flowability, etc., have a great impact on the quality of 3D printi...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
