-
BN-SAT08 High-temperature Release Agent Product Characteristics Environment Friendly: Boron nitride is environmentally friendly, non-toxic, non-polluting Chemical Properties: Strong non-stick properties in high temperature environment, stability in high temperature Physical Properties: Electrical insulator, low dielectric constant, good thermal conductivity and high lubricity Product Fe...
Read More
-
The organic/inorganic nanocomposite formed by dispersing the inorganic filler in a nanometer size in a general plastic matrix is called nanoplastic. In nanocomposites, nano-plastics have excellent properties such as high strength, heat resistance, high barrier properties, flame retardancy and excellent processability due to the nano-size effect of the dispersed phase, large specific surface area a...
Read More
-
Nano titanium dioxide transparent dispersion adopts international advanced dispersion technology to disperse nano-titanium dioxide powder (5-30nm) in aqueous phase medium to form highly dispersed, uniform and stable nano-titanium dioxide aqueous transparent dispersion. In addition to the characteristics of nanometer titanium dioxide transparent dispersions, nanometer titanium dioxide transparent d...
Read More
-
Iron nanopowder is black powder with a purity of over 99.9%, and can be divided into spherical and flake. Spherical nano iron powder Particle size 20-50nm, 50-70nm, 80-100nm, 100-200nm Application 1. Absorbing materials Metal nano-powders have a special absorption effect on electromagnetic waves. Iron, cobalt, zinc oxide powder and carbon-coated metal powder can be used as high-performance millime...
Read More
-
As a product with a wide range of performance, high temperature alumina can be used in many different industries, including the application in catalysts. However, in order to achieve the specified use standard, it can be carried out according to the operations specified below. 1. Adsorbents: This type of carrier is a porous substance with a large specific surface area. High temperatur...
Read More
-
1) Characteristics of aluminum powder, Aluminum is a silver-gray metal, which is relatively divided and suitable for pigment aluminum powder. Aluminum powder paste is a mixture of pigment aluminum powder and solvent. Its uses and characteristics are roughly the same as aluminum powder. Due to the mass of 26.98, the relative density of 2.55, the purity of 99.5%, the melting point of aluminum is 685...
Read More
-
Flake aluminum powder is also known as aluminum powder pigment. Aluminum powder pigment is one of the important metal pigments. It is a high-purity (99.3%~99.97%) metal aluminum as raw material, which is produced by wet ball milling process. Compared with other pigments, aluminum powder pigments have their unique performance characteristics. Characteristics of flake aluminum powder 1) Covering cha...
Read More
-
Application of flake aluminum powder 1) Industrial coatings The industrial coatings market includes the following areas: can coatings, coil coatings, general industrial coatings, marine coatings, powder coatings, anti-corrosion coatings, roof coatings, etc. The three types of coatings with the largest amount of aluminum powder pigments are: roof coatings (increasing aesthetics, extending the...
Read More
-
After purchasing graphite, it may be necessary to check its concentration. The purity of graphite powder can be detected by the following four steps. 1. First, use an electronic analytical balance to accurately weigh two samples of 1 gram of graphite powder, put them into a double-covered porcelain crucible and a graphite boat of known weight, and bake them in a drying oven at 105°C to a constant ...
Read More
-
Read More
-
Black silicon carbide is made of quartz sand, petroleum coke and high-quality silica as the main raw materials, and is smelted at high temperature in a resistance furnace. The raw materials used in the manufacture of green silicon carbide, such as black silicon carbide, are roughly the same, and industrial salt is added as a reactant and accelerator to react in a resistance furnace. In terms of it...
Read More
-
The nano cesium tungsten bronze powder produced by our company is an inorganic nano material with good near-infrared absorption, with uniform particles and good dispersion. It has good absorption in the near-infrared region (wavelength 800-1200nm) and high transmittance in the visible light region. The visible light transmittance of the thin film prepared by using nano cesium tungsten bronze powde...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
