1. Intrinsic Color: Black Bulk (micron-scale) pure Fe3O4(Magnetite) appears deep black under visible light. Reason: Fe3O4 is a narrow-bandgap semiconductor (bandgap ≈0.1≈0.1 eV), which absorbs light across the entire visible spectrum with virtually no reflection, resulting in a pure black appearance. Industrial products: Larger-particle Fe3O4powders (micron-scale...
Read More
There are three main reasons for making copper nanowires into wet powder (soaked in solvents such as ethanol/isopropanol) for packaging: 1. Preventing oxidation - The main reason is that copper nanowires have a diameter of tens of nanometers, a very large aspect ratio, a very high specific surface area, and extremely strong surface activity. When exposed to air in a dry state, it rapidly oxidizes ...
Read More
Scope: determination of Fe content/purity and impurity elements (Na, K, Ca, Mg, Al, Si, Mn, Cu, Pb, Cd, Cr, Ni, Zn, As, etc.) Instrumentation: ICP-OES (major Fe + common impurities, ppm level) / ICP-MS (trace impurities, ppb level) 1. Method Overview ICP-OES (Inductively Coupled Plasma – Optical Emission Spectrometry): major Fe content + common impurities (0.001%–100%), fast and cost-effective ICP...
Read More
What Is Nanoparticle Agglomeration? A single crystal grain or amorphous sphere obtained from synthesis is called a primary particle; when several primary particles touch and bind together into a larger unit, an agglomerate is formed. Agglomerates are usually divided into two classes according to the strength of the bonding: soft agglomerates are held together mainly by weak physical interactions s...
Read More
How Does EDS Identify the Spectral Lines of Light Elements? Energy-dispersive X-ray spectroscopy (EDS) is usually fitted to a scanning or a transmission electron microscope. An incident electron ejects an inner-shell electron from a sample atom; an outer electron then drops into the vacancy, and the energy difference between the two levels is emitted as a characteristic X-ray. A silicon drift dete...
Read More
Which Content Does Doping Concentration Refer To? Doping introduces foreign elements to change the composition and properties of a host material, and the doping concentration describes a content measured against some chosen statistical base. In A1−xMxB, for instance, x is the fraction of the A/M sublattice occupied by M: x = 0.05 means that 5% of those sites are occupied by M, not 5% of all atoms....
Read More