-
The purpose of surface modification of ultrafine powder is: 1. In order to improve or change the dispersibility of powder particles; 2. Improve durability, such as resistance, light resistance, heat resistance, weather resistance, etc.; 3. Improve particle surface activity; Adding new physical, chemical and mechanical properties and new functions to the surface of the particles to increase the add...
Read More
-
Silicon carbide whiskers are a kind of single-crystal fiber with a certain length-to-diameter ratio, which has very good high temperature resistance and high strength. It is mainly used in toughening applications where high temperature and high strength applications are required. Such as: aerospace materials, high-speed cutting tools. At present, it has a very high performance-price ratio. Silicon...
Read More
-
Preparation method and introduction of nano silicon carbide powder infrared radiation coating 1.1 Ingredients Powder radiant mixture: 40 to 80 parts by weight of nano SiC (SiC) powder raw material, and zirconia (ZrO2) powder raw material 5 to 30 based on the weight fraction of (D50 is 40 nm, β phase) nano SiC powder raw material. 5 parts by weight or less of chromium oxide (Cr2O3) powder raw mater...
Read More
-
Particle size D 0.1 ～ 2.5μm, length 10-50um, purity 99+, gray-green. Silicon carbide whisker is a kind of high-strength whisker-like (one-dimensional) single crystal with many excellent mechanical properties such as high strength and high modulus. Mainly used in ceramics, high-temperature components in the aerospace field, main strong bearing blocks, large mud pumps, etc. Physical characteristics:...
Read More
-
Nano silica dispersion, silicon oxide dispersion is translucent liquid, mainly used in coatings, refractory materials, textile industry, etc., with water resistance, fire resistance, scrub resistance, stain resistance. After the nano-silica is dispersed into a liquid, the appearance varies from white milky to colorless and transparent according to different dispersion systems. After the nano-silic...
Read More
-
Nano-scale silicon carbide has the following characteristics: 1. Its microhardness is 2840 ～ 3320kg / mm², its hardness is between corundum and diamond, and its mechanical strength is higher than corundum. 2. It has a strong ability to absorb infrared waves, can be used as infrared absorbing and transmitting materials, made into functional films or fibers, and can also be used for polishing and gr...
Read More
-
1. Thermally conductive fillers commonly used in insulating polymers 1. Nitride filler and its application The nitride fillers are mainly aluminum nitride (AlN), boron nitride (BN) and silicon nitride (Si3N4), etc. due to their high thermal conductivity, good electrical insulation performance, excellent high temperature resistance and excellent dielectric properties, etc. Characteristics and widel...
Read More
-
Nano oxides have many unique properties and have been widely used in textile fields such as antibacterial, deodorant, and ultraviolet protection. Similarly, nano-oxides have a positive effect on anti-wrinkle finishing. Nano-titanium dioxide or nano-silica is added to the traditional system to form nano-oxide anti-wrinkle finishing liquid through high-speed shearing, so that the fabric has anti-wri...
Read More
-
By mixing a small amount of nano silica into concrete, ultra-high strength and ultra-high durability concrete can be easily prepared. At present, a large number of research results have proved that nano SiO2 has a good modification effect on cement. The cement paste doped with nano silica has reduced fluidity, shortened setting time, and significantly improved early strength. Nano-doped nano silic...
Read More
-
Because of its low density, good oxidation resistance, high temperature resistance and corrosion resistance, silicon carbide has promoted the development of silicon carbide in the field of brake pads. Silicon carbide composite material is a material that can meet the high temperature of 1650-1700 ℃. Adding silicon carbide powder in the production of brake pads can more effectively improve the stab...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, among which β type has better performance than α type. Type β has higher...
Read More
-
Nano silica SIO2 is an important member of nano-materials. SAT Nano is currently capable of mass production. This move is bound to be China's electronic packaging materials, polymer composite materials, ceramics, rubber, plastics, glass steel, adhesives, and sealing The upgrading of products in many industries, such as glue and coating, brings new opportunities. Nano SIO2 silica is widely used in ...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
