-
Specification of titanium dioxide nanopowder: The particle size is very small: an average particle size of 5 nm. Good dispersion performance: 5 nm titanium dioxide has good dispersibility and can be self-dispersed into pure water without stirring. The dispersed liquid can be sprayed onto the surface of the furniture and the wall to form a uniform nano-coating to purify the indoor air. High catalyt...
Read More
-
Nano silica powder is a filler for reinforcing high-temperature vulcanized silicone rubber. The silica nanopowder aggregates have a good reinforcing effect on the silicone rubber. After adding SAT NANO nano silica powder to the rubber, a microcrystalline region with silica as a nucleus is formed, which increases the physical cross-linking point. Crystallization is more likely to occur and the stre...
Read More
-
A preparation method of a high-capacity silicon powder doped lithium battery anode slurry, which improves the capacity of the material by adding silicon nanopowder in the preparation process of the conventional anode slurry, and can meet the requirement of high energy density of the lithium ion battery And through the steps of thickener solution preparation, dispersing powder, high viscosity stirr...
Read More
-
First, powder materials are the key to 3D printing ceramic technology Additive manufacturing (3D printing) is known as the third industrial revolution. For ceramic materials, the properties of raw material powders (such as purity, particle size and distribution, particle morphology, etc.) have a direct impact on the performance of ceramics. . Ideally, the components are characterized by fine contr...
Read More
-
The addition of nano SiO2 powder as an admixture to cement-based materials can improve many of the properties of cement-based materials. A large number of research results show that adding appropriate amount of SiO2 nanopowder to cement-based materials, due to the volcanic ash effect of nano SiO2 particle, nucleation effect and micro-filling effect, can significantly improve the early strength of ...
Read More
-
Cubic silicon carbide, Beta SiC, is a synthetic high-performance material (only a small amount of high-purity cubic silicon carbide exists in nature). It is called "cube" because its structure belongs to the cubic system (diamond crystal). This structure also determines its own superior physical and chemical properties. B-SiC has a Mohs hardness range of 9.5 to 9.75, which is close to the most Moh...
Read More
-
Pure silicon carbide powder is a colorless, transparent crystal. Industrial silicon carbide is light yellow, green, blue or even black due to the type and content of impurities contained in it. The transparency varies with its purity. The crystal structure of silicon carbide is divided into hexagonal or rhombohedral α-SiC and cubic β-SiC (called cubic silicon carbide). Since α-SiC constitutes...
Read More
-
Titanium diboride nanopowder has the characteristics of high melting point and high hardness, and is resistant to molten metal corrosion, and is often used for preparing composite ceramics. A*STAR (Agency for Science, Technology and Reseach), Singapore's largest research institute, has successfully improved the strength and thermal properties of materials by adding titanium diboride to nickel-base...
Read More
-
The silicon carbide nanopowder has high purity, small particle size distribution range and high specific surface area; nano-silicon carbide has stable chemical properties, high thermal conductivity, small thermal expansion coefficient, high hardness and Mohs hardness of 9.5. Nano silicon carbide wear-resistant, high temperature resistant, corrosion resistant, acid and alkali resistant solvents. 1....
Read More
-
New energy vehicles, communications and portable devices require lithium-ion batteries for high capacity and high endurance. Lithium-ion batteries urgently need to be updated to increase capacity, cycle and size. At present, the silicon-carbon negative electrode of lithium battery is all kinds of carbon materials mainly composed of graphite, and its theoretical capacity is only 372 mAh/g. In pract...
Read More
-
Due to the influence of diseases, aging, frequent traffic accidents and other factors, the number of cases of bone injury has increased year by year. According to statistics, there are 3 million orthopedic cases every year in China, and the demand for bone substitute materials is increasing. In recent years, bone substitute materials represented by hydroxyapatite have gradually become the darling ...
Read More
-
Nano gold powder refers to tiny particles of gold with a diameter of 1 to 100 nm. It has high electron density, dielectric properties and catalytic properties, and can bind to a variety of biomacromolecules without affecting its biological activity. Preparation of gold nanoparticles with different particle sizes by chloroauric acid reduction. The effect on human skin is as follows: By massaging th...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
