13929258449

admin@satnano.com

Search

Home

Search

  • 14

    Jan

    Nano cuprous oxide Cu2O-a standout in the field of high-end antibacterial

    Nano cuprous oxide Cu2O is a kind of photoelectric material with a wide range of uses. The main uses are as follows: Nano cuprous oxide Cu2O is used as anti-fouling primer for ships in the coating industry to prevent marine organisms from adhering to the bottom of ships; Nano cuprous oxide Cu2O is used as a colorant for red glass and red enamel in the glass and ceramic industries; Nano cuprous oxi...
    Read More
  • 14

    Jan

    The antibacterial performance of nano copper oxide CuO on some bacteria can be as high as over 99.9%

    Because nano copper oxide CuO is a p-type semiconductor, it has holes (CuO) +, which may interact with the environment and play an antibacterial or antibacterial effect. Studies have shown that nano CuO has good antibacterial ability against pneumonia and Pseudomonas aeruginosa. The antibacterial process of metal oxide nano-copper oxide CuO can be simply described as: under the excitation of light...
    Read More
  • 04

    Mar

    Silver coated copper powder is widely used, and chemical composite method is the mainstream process for preparation

    In recent years, silver coated copper powder has been widely used, not only as the electrode of chip electronic components, but also in the fields of catalyst and electronic paste. At present, the electronic paste used in my country is basically micron-level pure silver powder, which is expensive and mainly imported. Micron sterling silver powder has the problem of particle sedimentation in the la...
    Read More
  • 04

    Mar

    Silver plated copper powder can be widely used in conductive adhesives, conductive coatings, polymer pastes

    The silver plated copper powder adopts electroless plating technology to form silver plating with different thicknesses on the surface of ultra-fine copper powder and nickel powder; it has good oxidation resistance, good electrical conductivity, low resistivity, high dispersion and high stability. Silver plated copper powder is an ideal conductive powder and is an ideal material for low cost and h...
    Read More
  • 14

    Apr

    How to modify and disperse nanoparticles

    Chemical modification and dispersion is to use the surface groups of nanoparticles to form chemical bonds with reactive organic compounds. The nanoparticles are soluble in organic media due to the branched chains or groups of organic compounds on the surface. dispersion in. There are usually two ways of chemical modification: one is to use the end groups of macromolecules to chemically react with ...
    Read More
  • 14

    Apr

    How to effectively control the agglomeration of nanoparticle powders

    Nanoparticles have a special surface structure, which lacks adjacent coordinating atoms on the surface, and has high activity, so it is easy to agglomerate. Due to the strong self-absorption property among nanomaterial particles, the agglomeration of nanoparticles is inevitable. Aggregates can be divided into two types: hard agglomerates and soft agglomerates. The formation process of agglomerates...
    Read More
  • 21

    Apr

    How should nano silver powder be stored?

    The particle size of nano-level silver powder is usually between 20nm and 100nm. The performance of nano-silver powder is directly related to the particle size. The study found that the smaller the particle size, the higher the valence state, and the stronger the bactericidal performance. What are the important factors affecting the performance of nano-silver powder? Common metal activity sequence...
    Read More
  • 01

    Jul

    How to Prepare of Samples for Nanoparticle Transmission Electron Microscopy (TEM)

    Transmission Electron Microscope (TEM) Transmission electron microscopy uses an electron beam that penetrates a sample to image, which requires the sample being observed to be "transparent" to the incident electron beam. Transmission electron microscopy is widely used in materials science and biology. Since electrons are easily scattered or absorbed by objects, the penetration is low, and the dens...
    Read More
  • 28

    Jul

    How to prepare and test the thermal insulation and infrared blocking properties of cesium tungsten oxide nanoparticles modified PVC film

    In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
    Read More
  • 28

    Jul

    With Cesium Tungsten bronze Nanoparticles, the Age of Smart Insulation Has Come

    Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
    Read More
  • 11

    Aug

    A passivation layer of metallic aluminum nanoparticles for protection

    In the process of powder storage, transportation and use, it is often hoped that the nano-aluminum powder exhibits low activity and is less affected by external environmental factors (temperature, humidity, etc.), so that the product has stable performance for a long time. On the other hand, it is desirable to exhibit high activity in solid rocket propellants to obtain high energy release rate and...
    Read More
  • 21

    Sep

    What is the basic principle of dispersant dispersing nanoparticles

    The formation of a stable dispersion system, in addition to using electrostatic repulsion, that is, the negative charges adsorbed on the surface of the particles repel each other, to prevent the adsorption/aggregation between particles and finally form large particles and stratify/settlement, but also use. The theory of the steric hindrance effect, whereby particles that have adsorbed negative cha...
    Read More
< 1 2 3 4 5 6 >
[  A total of  6  pages]
Leave a message Please click here for inquiry
Provide the right solution according to your needs,offer efficient service,leave a message for the product information and requirements you need,customize now!