-
As the anode material of lithium ion battery, silicon nanopowder has the highest theoretical specific capacity (up to 4200 mAh/g), which is much higher than the carbon powder widely used at present, but the biggest disadvantage of silicon powder as the negative electrode of lithium ion battery is the process of alloying with lithium. In the case of a large volume change, the active material is det...
Read More
-
1)Silicon carbide whiskers should be pre-dispersed as much as possible before use. They should be mechanically and ultrasonically dispersed with water, ethanol, etc., and then mixed with the matrix material. 2) The amount of silicon carbide whiskers added to the material is not as high as possible, and there is usually an optimum value. Ordinary ceramics are generally added in an amount of 1-10%. ...
Read More
-
Specification of titanium dioxide nanopowder: The particle size is very small: an average particle size of 5 nm. Good dispersion performance: 5 nm titanium dioxide has good dispersibility and can be self-dispersed into pure water without stirring. The dispersed liquid can be sprayed onto the surface of the furniture and the wall to form a uniform nano-coating to purify the indoor air. High catalyt...
Read More
-
First, powder materials are the key to 3D printing ceramic technology Additive manufacturing (3D printing) is known as the third industrial revolution. For ceramic materials, the properties of raw material powders (such as purity, particle size and distribution, particle morphology, etc.) have a direct impact on the performance of ceramics. . Ideally, the components are characterized by fine contr...
Read More
-
Cubic silicon carbide, Beta SiC, is a synthetic high-performance material (only a small amount of high-purity cubic silicon carbide exists in nature). It is called "cube" because its structure belongs to the cubic system (diamond crystal). This structure also determines its own superior physical and chemical properties. B-SiC has a Mohs hardness range of 9.5 to 9.75, which is close to the most Moh...
Read More
-
Pure silicon carbide powder is a colorless, transparent crystal. Industrial silicon carbide is light yellow, green, blue or even black due to the type and content of impurities contained in it. The transparency varies with its purity. The crystal structure of silicon carbide is divided into hexagonal or rhombohedral α-SiC and cubic β-SiC (called cubic silicon carbide). Since α-SiC constitutes...
Read More
-
Titanium diboride nanopowder has the characteristics of high melting point and high hardness, and is resistant to molten metal corrosion, and is often used for preparing composite ceramics. A*STAR (Agency for Science, Technology and Reseach), Singapore's largest research institute, has successfully improved the strength and thermal properties of materials by adding titanium diboride to nickel-base...
Read More
-
The silicon carbide nanopowder has high purity, small particle size distribution range and high specific surface area; nano-silicon carbide has stable chemical properties, high thermal conductivity, small thermal expansion coefficient, high hardness and Mohs hardness of 9.5. Nano silicon carbide wear-resistant, high temperature resistant, corrosion resistant, acid and alkali resistant solvents. 1....
Read More
-
Since ultrafine powder has surface effect, small size effect, quantum effect and macroscopic quantum tunneling effect, it has many special properties in catalytic, optical, magnetic and mechanical properties compared with crystalline materials of the same composition. There are many important applications in the fields of medicine, microelectronics, and nuclear technology. "Plasma milling" refers ...
Read More
-
The purpose of surface modification of ultrafine powder is: 1. In order to improve or change the dispersibility of powder particles; 2. Improve durability, such as resistance, light resistance, heat resistance, weather resistance, etc.; 3. Improve particle surface activity; Adding new physical, chemical and mechanical properties and new functions to the surface of the particles to increase the add...
Read More
-
The application of nanomaterials in surface engineering is mostly to stabilize the nanoparticle dispersion in the organic medium. For example, the workpiece is ground and the antifriction material is dispersed in the lubricating oil in an appropriate manner. The ultrafine polishing liquid is nanometer SiO2, nanometer. Lubricants for nanoparticles such as Al2O3, nano-MoS2, nano-Cr2o3, and nano-diam...
Read More
-
Silicon carbide whiskers are a kind of single-crystal fiber with a certain length-to-diameter ratio, which has very good high temperature resistance and high strength. It is mainly used in toughening applications where high temperature and high strength applications are required. Such as: aerospace materials, high-speed cutting tools. At present, it has a very high performance-price ratio. Silicon...
Read More