-
Powder surface modification changes the surface state of particles through physical or chemical means, with the core being to break the agglomeration force between particles. When the particle size of the powder decreases to the micrometer or nanometer level, the surface energy sharply increases, and van der Waals forces, hydrogen bonds, and other gravitational forces cause the particles to sponta...
Read More
-
In today's paint and plastic industry, which pursues high performance, lightweight, and environmental protection, traditional fillers and reinforcing agents have long been unable to meet the demands of the high-end market. The emergence of nano high-purity magnesium oxide, with its triple advantages of "filling+reinforcement+functionalization", brings performance leaps to coating and plastic produ...
Read More
-
FeNi50 metal powder is a medium to high nickel iron-based alloy powder based on the iron nickel binary system with a nickel content of about 50 wt.%. Its typical characteristics include stable austenite structure, excellent thermal expansion matching ability, good toughness, and adjustable magnetic properties. In the material system, FeNi50 is between low nickel structural alloys and high nickel I...
Read More
-
SAT NANO is a best supplier of ZnO nanoparticle and TiO2 nanoparticle in China. They are used on antibacterial materials. Nano zinc oxide (ZnO NPs) and nano titanium dioxide (TiO ₂ NPs) are currently widely studied and applied broad-spectrum antibacterial materials. They mainly exert antibacterial effects through mechanisms such as photocatalytic production of reactive oxygen species (ROS), releas...
Read More
-
Why modify the powder? Inorganic powders have hydrophilic and polar surfaces, but poor compatibility with organic matrices (plastics, rubber, resins). Direct use can lead to poor performance, so modification is necessary. (1) Improve dispersibility and prevent agglomeration. Inorganic powders with a large specific surface area are prone to agglomeration, which can lead to defects and a decrease in...
Read More
-
The preparation of nanopowders is generally categorized into Physical Methods and Chemical Methods. Below is a detailed comparison list highlighting their characteristics: Comparison Table: Physical vs. Chemical Synthesis of Nanopowders Feature Physical Methods (Top-down) Chemical Methods (Bottom-up) Basic Principle Top-down: Bulk materials are broken down into nanoparticles using p...
Read More
-
The development of conductive pastes began in the 1950s. In 1954, British scholar C.F. Powell first reported the method of preparing conductive pastes by suspending silver particles in organic solvents, laying the technical foundation. Subsequently, in the 1960s and 1970s, with the rise of thick film hybrid integrated circuits, precious metal conductive pastes such as silver paste and gold paste g...
Read More
-
Carbon nanotubes (CNTs), as typical one-dimensional nanomaterials, have shown great potential for applications in various fields such as energy storage, composite materials, biomedical, electronic devices, etc. due to their excellent mechanical properties (100 times higher than steel), outstanding conductivity, excellent thermal properties, and unique optical properties. However, the strong van de...
Read More
-
1. Structural Paradigm: The Inverse Spinel Advantage Nickel Ferrite (NiFe2O4) stands as a premier magnetic semiconductor characterized by its inverse spinel crystal structure. In this configuration, Ni2+ ions reside in octahedral [B] sites, while Fe3+Fe3+ ions are split between tetrahedral (A) and octahedral [B] sites. This atomic arrangement facilitates strong&n...
Read More
-
1. Intrinsic Color: Black Bulk (micron-scale) pure Fe3O4(Magnetite) appears deep black under visible light. Reason: Fe3O4 is a narrow-bandgap semiconductor (bandgap ≈0.1≈0.1 eV), which absorbs light across the entire visible spectrum with virtually no reflection, resulting in a pure black appearance. Industrial products: Larger-particle Fe3O4powders (micron-scale...
Read More
-
Scope: determination of Fe content/purity and impurity elements (Na, K, Ca, Mg, Al, Si, Mn, Cu, Pb, Cd, Cr, Ni, Zn, As, etc.) Instrumentation: ICP-OES (major Fe + common impurities, ppm level) / ICP-MS (trace impurities, ppb level) 1. Method Overview ICP-OES (Inductively Coupled Plasma – Optical Emission Spectrometry): major Fe content + common impurities (0.001%–100%), fast and cost-effective ICP...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
