-
Lanthanum belongs to rare earth oxides and is one of the important products of light rare earths. Because of its good physical and chemical properties, it has been widely used in civilian, military and high-tech fields. For example, La2O has been continuously developed in the application of rare glass, ceramics, catalysts, phosphors, lasers, heating elements, cathode materials and electrical conta...
Read More
-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
-
Dental restoration parts customization Solution 1. Personalized and complex geometric products are the areas where metal 3D printing technology is best at, ensuring a good match with the patient’s mouth, and the surface roughness of the parts is very suitable for the adhesion between the ceramic outer layer and the body 2. Cobalt-chromium alloy is used for printing materials, which has good biolog...
Read More
-
Mould of car blower impeller solution 1. The conformal waterway design that fits the wall surface has a cooling effect that traditional waterways can’t match and improves production efficiency. 2. The well-distributed conformal waterway design provides outstanding cooling consistency, ensures uniform shrinkage of the product, and improves product quality 3. The integrated printing and processing m...
Read More
-
Aerospace super alloy parts processing solution 1. With traditional craftsmanship in aviation blade manufacturing and processing problems, metal 3D printing technology can solve the problem ingeniously 2. At the same time, under the premise of ensuring the function, the primary requirement of the lightweight aerospace industry for parts, metal 3D printing technology can easily realize the lightwei...
Read More
-
Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
Read More
-
In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
Read More
-
Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
Read More
-
Nano thermal insulation coatings can be used to absorb ultraviolet rays from sunlight, and are often used in current decoration buildings. Water-based nano transparent thermal insulation coating not only has the effect of high efficiency and energy saving, but also has the comprehensive advantages of green environmental protection, health and safety. As an alternative product of solvent-based glas...
Read More
-
Infrared light has an obvious thermal effect, which can easily lead to an increase in ambient temperature. Ordinary architectural glass has no thermal insulation effect, and can only be achieved by means of filming. Therefore, architectural glass, car film, outdoor facilities and other surfaces need to use thermal insulation materials to achieve the effect of thermal insulation and energy saving. ...
Read More
-
1. In the application of nano ferric oxide in magnetic materials and magnetic recording materials The size of magnetic particles as a magnetic recording unit must meet the following requirements: the length of particles should be smaller than the recording wavelength; The width of the particles (including possible lengths) should be much smaller than the recording depth; there should be as many ma...
Read More
-
In recent years, with the development of science and technology, nanotechnology has begun to be applied to all aspects of our lives, and the fields involved are also increasing. Especially when this emerging technology meets our traditional industry ceramics, the combination of the two improves the product added value of the ceramic industry. Alumina ceramics have a series of excellent characteris...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
