-
(1) Black nano Fe3O4 iron oxide: Size: 30nm, PH: 8-10, SSA:4-5g/cm3 Black nano ferroferric oxide is a mixed valence oxide of iron with a melting point of 1597°C. It is insoluble in water but soluble in acid solutions. Vk-EF01 has anti-corrosion effect. For example, the bluing of steel parts (also known as blue-burning and baking blue) is to use the oxidation effect of alkaline oxidizing solution t...
Read More
-
Nano cerium oxide CeO2 additives can improve the microstructure of alumina-based ceramics, which is conducive to the densification of materials, and improves mechanical properties and thermal shock resistance. But different content of nano-cerium oxide CeO2 has different effects on its performance. 1. Nano cerium oxide CeO2 additive can obviously promote the sintering of alumina-based ceramics, im...
Read More
-
1. Introduction to the characteristics of nano copper oxide Copper oxide powder is a brown-black metal oxide powder with a wide range of uses. Ordinary copper oxide is a multifunctional fine inorganic material with a wide range of uses, mainly used in printing and dyeing, glass, ceramics, medicine, catalysis and other fields. It can be used as a catalyst and catalyst carrier and electrode activati...
Read More
-
Lanthanum belongs to rare earth oxides and is one of the important products of light rare earths. Because of its good physical and chemical properties, it has been widely used in civilian, military and high-tech fields. For example, La2O has been continuously developed in the application of rare glass, ceramics, catalysts, phosphors, lasers, heating elements, cathode materials and electrical conta...
Read More
-
Compared with traditional ceramic materials, ceramics sintered with nano titanium oxide produced by SAT NANO have the following characteristics: 1. Mechanical properties The mechanical properties of nano-oxide ceramics include the hardness, fracture toughness and low-temperature ductility of nano-ceramic materials. Especially the hardness and strength are greatly improved at high temperature, and ...
Read More
-
Nano zinc oxide materials have been successfully applied to textiles in many fields such as medical, health, and health care. The antibacterial mechanism of nano zinc oxide is actually the result of the combined action of photocatalysis and metal ion dissolution. Finishing process: weigh 3g low poly sodium polyacrylate, adjust the pH to 9-10 with 10% ammonia water, add 80g water and 1.5g nano zinc...
Read More
-
Under the situation of rapid development of science and technology, to prepare high-temperature, high-performance, new-type materials, the first thing to do is to solve the refractory materials needed in the preparation process. The characteristics of refractory materials are as follows: 1. Mechanical properties The elastic modulus of special refractory materials is large. Most have higher mechani...
Read More
-
1. Nano cerium oxide improves the anti-ultraviolet aging performance of polymers The 4f electronic structure of nano CeO2 is very sensitive to light absorption, and the absorption band is mostly in the ultraviolet region (200-400nm). It has no characteristic absorption of visible light and has good transmittance. Ordinary ultra-fine CeO2 for UV absorption has long been used in the glass industry: ...
Read More
-
1. Nano zinc oxide is an active agent and vulcanizing agent for rubber. Due to the small size effect and large surface effect of nano-materials, the function of nano-zinc oxide in rubber formulations is not only a high-active agent, but also improves wear resistance. It can improve the adhesive force of the rubber frame material, increase the deformation ability and reduce the heat generation and ...
Read More
-
Application Analysis of Nano Tungsten Trioxide Nano WO3 yellow tungsten has a large specific surface area and significant surface effect. It is a good catalyst. It can be used as both a main catalyst and an auxiliary catalyst, and it has a high selectivity to the reaction. WO3 has a strong ability to absorb electromagnetic waves and can be used as an excellent solar energy absorbing material and r...
Read More
-
1. The advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides, such as yttrium oxide, cerium oxide, calcium oxide, and magnesium oxide. The essence of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria-doped zirconia has good comprehensive properties, and is al...
Read More
-
Cu is a transition metal and has a special electronic structure and electronic gain and loss properties that are different from other metals. It can show good catalysis for different chemical reactions and is widely used in the field of catalysts. When the size of CuO particles is as small as nanometers, due to the special characteristics of multiple surface free electrons and high surface energy ...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
