-
Nano silica powder is a filler for reinforcing high-temperature vulcanized silicone rubber. The silica nanopowder aggregates have a good reinforcing effect on the silicone rubber. After adding SAT NANO nano silica powder to the rubber, a microcrystalline region with silica as a nucleus is formed, which increases the physical cross-linking point. Crystallization is more likely to occur and the stre...
Read More
-
1, thermal silica gel and thermal epoxy resin Ultra-high thermal conductivity nano AlN composite silica gel has good thermal conductivity, good electrical insulation, wide electrical insulation temperature (operating temperature -60 ° C - 200 ° C), low consistency and good construction performance. The products have reached or exceeded the imported products, because they can replace the similar im...
Read More
-
A preparation method of a high-capacity silicon powder doped lithium battery anode slurry, which improves the capacity of the material by adding silicon nanopowder in the preparation process of the conventional anode slurry, and can meet the requirement of high energy density of the lithium ion battery And through the steps of thickener solution preparation, dispersing powder, high viscosity stirr...
Read More
-
First, powder materials are the key to 3D printing ceramic technology Additive manufacturing (3D printing) is known as the third industrial revolution. For ceramic materials, the properties of raw material powders (such as purity, particle size and distribution, particle morphology, etc.) have a direct impact on the performance of ceramics. . Ideally, the components are characterized by fine contr...
Read More
-
The organic/inorganic nanocomposite formed by dispersing the inorganic filler in a nanometer size in a general plastic matrix is called nanoplastic. In nanocomposites, nano-plastics have excellent properties such as high strength, heat resistance, high barrier properties, flame retardancy and excellent processability due to the nano-size effect of the dispersed phase, large specific surface area a...
Read More
-
1. Application of ultrafine copper powder on MLCC internal electrodes Copper has the advantages of small resistivity, small electromigration speed, and low price. It is an ideal substitute for silver-palladium internal electrodes, but its chemical properties are more active. In the air, powdery copper with large specific surface area is easily Oxidation, the surface will form a film of Cu2O and Cu...
Read More
-
The addition of nano SiO2 powder as an admixture to cement-based materials can improve many of the properties of cement-based materials. A large number of research results show that adding appropriate amount of SiO2 nanopowder to cement-based materials, due to the volcanic ash effect of nano SiO2 particle, nucleation effect and micro-filling effect, can significantly improve the early strength of ...
Read More
-
Pure silicon carbide powder is a colorless, transparent crystal. Industrial silicon carbide is light yellow, green, blue or even black due to the type and content of impurities contained in it. The transparency varies with its purity. The crystal structure of silicon carbide is divided into hexagonal or rhombohedral α-SiC and cubic β-SiC (called cubic silicon carbide). Since α-SiC constitutes...
Read More
-
Titanium diboride nanopowder has the characteristics of high melting point and high hardness, and is resistant to molten metal corrosion, and is often used for preparing composite ceramics. A*STAR (Agency for Science, Technology and Reseach), Singapore's largest research institute, has successfully improved the strength and thermal properties of materials by adding titanium diboride to nickel-base...
Read More
-
The silicon carbide nanopowder has high purity, small particle size distribution range and high specific surface area; nano-silicon carbide has stable chemical properties, high thermal conductivity, small thermal expansion coefficient, high hardness and Mohs hardness of 9.5. Nano silicon carbide wear-resistant, high temperature resistant, corrosion resistant, acid and alkali resistant solvents. 1....
Read More
-
The aluminum nitride nanopowder has the characteristics of high specific surface area, high hardness, high thermal conductivity and high insulation. It is a diamond-like nitride, stable to 2200 ° C, high room temperature strength, good compatibility with the substrate interface, and can improve compounding. Thermal and dielectric properties, mechanical properties and wear resistance of the materia...
Read More
-
New energy vehicles, communications and portable devices require lithium-ion batteries for high capacity and high endurance. Lithium-ion batteries urgently need to be updated to increase capacity, cycle and size. At present, the silicon-carbon negative electrode of lithium battery is all kinds of carbon materials mainly composed of graphite, and its theoretical capacity is only 372 mAh/g. In pract...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
