-
1, XRF (X Ray Fluorescence X-ray fluorescence) Use this method for surface chemical analysis, but you must purchase standard samples and draw standard curves. The measured sample must meet a number of conditions, such as a smooth surface and uniform composition. If the composition is not uniform, it can only be stated that the composition of the micro-area measured by XRF is the same, and the othe...
Read More
-
Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
Read More
-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. Several preparation methods of nano-boron carbide (supply 100-200nm): 1. Carbothermal reduction method Be...
Read More
-
The preparation methods of CNTS loaded metal nanoparticles are mainly physical preparation and chemical preparation methods. The most commonly used is chemical preparation method. The chemical preparation method is generally uniformly loaded with metal nanoparticles on the carrier CNTS. The general process of chemical preparation is that the metal front drive is restored to atoms, and the metal at...
Read More
-
The surface coating treatment of ultrafine powder is a very useful technology, which can improve the flow performance of the powder, reduce dust flying, improve stability and moisture resistance, and enhance the solubility of the powder. The commonly used surface coating treatment methods for ultrafine powders include the following: Wet surface treatment: The coating material is added in liquid fo...
Read More
-
XRF is the abbreviation for X-ray fluorescence analysis, which utilizes the characteristics of X-rays to perform non-destructive analysis of substances. XRF is the abbreviation for X-ray fluorescence spectroscopy analyzer, suitable for identifying and measuring elements in solid, liquid, and powder samples. It determines the elemental composition of the sample by measuring the fluorescence emitted...
Read More
-
Introduction: Nanotechnology is becoming increasingly important in many fields, from medicine to electronics. Nanomaterials, including nanoparticles, nanotubes, and nanowires, are essential components of many nanotechnology applications. Producing these materials requires specialized techniques, such as wet and dry methods. In this article, we will explore what dry and wet methods are, their benef...
Read More
-
Synthesis of Carbon Quantum Dots The synthesis of carbon quantum dots can be mainly divided into two categories: top-down method and bottom-up method. Through the pre-treatment, preparation, and subsequent processing, carbon quantum dots can be controlled in size, passivated on the surface, doped with heteroatoms, and nanocomposites to meet the requirements. Top-down approach Top down method: lase...
Read More
-
What are the surface modification methods for alumina powder? Aluminum oxide, a common material, is commonly used in the production of ceramics, coatings, catalysts, etc. However, in some applications, such as filling composite materials or preparing high-performance catalysts, surface modification of alumina is required to improve its performance and stability. This article will discuss the surfa...
Read More
-
Aluminum powder is a commonly used filler, widely used in fields such as thermal interface materials and industrial coatings. However, traditional aluminum powder has problems such as high viscosity, poor dispersibility, and poor thermal stability, which limit its effectiveness in some special applications. To address these issues, researchers have carried out many modification methods to improve ...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
