-
As a key member of non-metallic materials, ceramic materials have a large number of attractive properties, such as good mechanical and electrochemical properties, low thermal conductivity, dense and uniform structure, wear resistance and corrosion resistance, etc. The high specific stiffness, high specific strength and chemical inertness of ceramic materials in complex environments, and the low de...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, and the performance of β type is better than that of α type. Type β has ...
Read More
-
The beta silicon carbide whiskers produced by SAT NANO are needle-shaped cubic crystals. As an atomic crystal, it has low density, high melting point, high strength, high modulus, low thermal expansion rate, and excellent properties such as wear resistance, corrosion resistance, high temperature resistance, and oxidation resistance. It is mainly used for metal substrates and ceramic substrates. , ...
Read More
-
Transmission Electron Microscope (TEM) Transmission electron microscopy uses an electron beam that penetrates a sample to image, which requires the sample being observed to be "transparent" to the incident electron beam. Transmission electron microscopy is widely used in materials science and biology. Since electrons are easily scattered or absorbed by objects, the penetration is low, and the dens...
Read More
-
ICP-MS Inductively Coupled Plasma Mass Spectrometer is an analytical instrument that combines ICP technology and mass spectrometry. It can simultaneously measure dozens of trace elements. The instrument covers a wide range of elements, including alkali metals, alkaline earth metals, transition Metals and other metalloids, rare earth elements, most halogens and some non-metallic elements. Principle...
Read More
-
1 Modified high-strength new material Nano SiC powder particles have good compatibility in polymer composite materials, good dispersion and good basic bonding, the tensile strength of modified high-strength nylon alloy is more than 100% higher than that of ordinary PA6, and the wear resistance is improved by more than 2.5 times. Users have responded well. It is mainly used for polymer parts of arm...
Read More
-
The preparation of SEM nano powder samples usually requires the following steps: Sample preparation Firstly, it is necessary to choose an appropriate sample preparation method. Usually there are physical methods, chemical methods, biological methods, mechanical methods, etc. Among them, the most common methods are magnetron sputtering, chemical reduction, aerosol, etc. Sample dispersion It is also...
Read More
-
The measurement deviation of particle size analyzer is influenced by various factors, and the following are some possible factors: The physical properties of the sample: The shape, size, density, and color of the sample can all affect the measurement deviation of the particle size analyzer. Measurement environment: Measuring environmental factors such as temperature, humidity, and pressure may lea...
Read More
-
Ultrafine nano powder is an important product of the development of modern science and technology, which is widely used in such fields as electronic products, biomedicine and so on. The particle size of ultra-fine nano powder has an important impact on its performance, so the development of particle size detection technology of ultra-fine nano powder has also become a hot topic. As a company speci...
Read More
-
Carbon nanotubes (CNTs) reinforced aluminum composites with unique intragranular dispersion were obtained using ultra short carbon nanotubes, and nanoscale carbon nanotubes were uniformly distributed within ultrafine aluminum grains. Compared with typical CNT/Al composite materials with intergranular carbon nanotube dispersion, this intragranular carbon nanotube/aluminum composite material has str...
Read More
-
Nickel based high-temperature alloy powder are a type of metal material specially designed to withstand high temperature, high pressure, and corrosive environments, and are very suitable for use under extreme conditions. They are mainly composed of nickel, chromium, and iron, and elements such as molybdenum, cobalt, niobium, titanium, and aluminum are often added to enhance their performance. Clas...
Read More
-
The preparation method is one of the key factors affecting the specific surface area of oxide powders. Different preparation methods can lead to differences in the size, shape, and porosity of powder particles, thereby affecting their specific surface area. For example, the sol gel method can prepare oxide powders with high specific surface area, uniform particle size and fine size; The co precipi...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
