-
As the anode material of lithium ion battery, silicon nanopowder has the highest theoretical specific capacity (up to 4200 mAh/g), which is much higher than the carbon powder widely used at present, but the biggest disadvantage of silicon powder as the negative electrode of lithium ion battery is the process of alloying with lithium. In the case of a large volume change, the active material is det...
Read More
-
Specification of titanium dioxide nanopowder: The particle size is very small: an average particle size of 5 nm. Good dispersion performance: 5 nm titanium dioxide has good dispersibility and can be self-dispersed into pure water without stirring. The dispersed liquid can be sprayed onto the surface of the furniture and the wall to form a uniform nano-coating to purify the indoor air. High catalyt...
Read More
-
Physical properties of tantalum powder The thickness of Ta powder is due to the atomic number of Ta being 73, the atomic mass is close to 181, the density is 16.65g/m3, the texture is blue-gray, the hardness is 6-6.5, and the melting point is as high as 2996°C, second only to carbon, Tungsten, tantalum and niobium; Tantalum is a rare transition metal suitable for replacing platinum as a laboratory...
Read More
-
BN-SAT08 High-temperature Release Agent Product Characteristics Environment Friendly: Boron nitride is environmentally friendly, non-toxic, non-polluting Chemical Properties: Strong non-stick properties in high temperature environment, stability in high temperature Physical Properties: Electrical insulator, low dielectric constant, good thermal conductivity and high lubricity Product Fe...
Read More
-
Cubic silicon carbide, Beta SiC, is a synthetic high-performance material (only a small amount of high-purity cubic silicon carbide exists in nature). It is called "cube" because its structure belongs to the cubic system (diamond crystal). This structure also determines its own superior physical and chemical properties. B-SiC has a Mohs hardness range of 9.5 to 9.75, which is close to the most Moh...
Read More
-
Pure silicon carbide powder is a colorless, transparent crystal. Industrial silicon carbide is light yellow, green, blue or even black due to the type and content of impurities contained in it. The transparency varies with its purity. The crystal structure of silicon carbide is divided into hexagonal or rhombohedral α-SiC and cubic β-SiC (called cubic silicon carbide). Since α-SiC constitutes...
Read More
-
Titanium diboride nanopowder has the characteristics of high melting point and high hardness, and is resistant to molten metal corrosion, and is often used for preparing composite ceramics. A*STAR (Agency for Science, Technology and Reseach), Singapore's largest research institute, has successfully improved the strength and thermal properties of materials by adding titanium diboride to nickel-base...
Read More
-
First, the advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides such as cerium oxide, cerium oxide, calcium oxide, magnesium oxide. The stability of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria doped zirconia has good comprehensive properties and is the...
Read More
-
The application of nanomaterials in surface engineering is mostly to stabilize the nanoparticle dispersion in the organic medium. For example, the workpiece is ground and the antifriction material is dispersed in the lubricating oil in an appropriate manner. The ultrafine polishing liquid is nanometer SiO2, nanometer. Lubricants for nanoparticles such as Al2O3, nano-MoS2, nano-Cr2o3, and nano-diam...
Read More
-
Titanium is a chemical element, chemical symbol Ti, atomic number 22, located in the fourth cycle of the chemical periodic table, group IVB. It is a silver-white transition metal characterized by light weight, high strength, metallic luster and resistance to wet chlorine gas. The most common compound of titanium is titanium dioxide, which can be used to make white pigments. In the past, people use...
Read More
-
The granular shape of titanium powder includes spherical, polygonal, sponge, and flake shapes. The granular shape is related to the method of preparing titanium powder. The requirements for titanium powder generally include three aspects, namely purity, particle size and granular shape. Titanium powder is divided into 4 grades. The size of 1000-50um is coarse powder, 50-10um is fine powder, 10-0.u...
Read More
-
Nano titanium dioxide transparent dispersion adopts international advanced dispersion technology to disperse nano-titanium dioxide powder (5-30nm) in aqueous phase medium to form highly dispersed, uniform and stable nano-titanium dioxide aqueous transparent dispersion. In addition to the characteristics of nanometer titanium dioxide transparent dispersions, nanometer titanium dioxide transparent d...
Read More