-
Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
Read More
-
The displacement reaction method is a common process for processing silver-coated copper powder. Because the surface activity of copper powder is very large, it is easy to oxidize, so it must be pretreated before coating the copper powder. 1. Put the required amount of copper powder into the pretreatment tank, and then wash with 15% 30% dilute sulfuric acid to keep the pH of the solution at 3 2. W...
Read More
-
Nano cuprous oxide Cu2O is a kind of photoelectric material with a wide range of uses. The main uses are as follows: Nano cuprous oxide Cu2O is used as anti-fouling primer for ships in the coating industry to prevent marine organisms from adhering to the bottom of ships; Nano cuprous oxide Cu2O is used as a colorant for red glass and red enamel in the glass and ceramic industries; Nano cuprous oxi...
Read More
-
Because nano copper oxide CuO is a p-type semiconductor, it has holes (CuO) +, which may interact with the environment and play an antibacterial or antibacterial effect. Studies have shown that nano CuO has good antibacterial ability against pneumonia and Pseudomonas aeruginosa. The antibacterial process of metal oxide nano-copper oxide CuO can be simply described as: under the excitation of light...
Read More
-
In recent years, silver coated copper powder has been widely used, not only as the electrode of chip electronic components, but also in the fields of catalyst and electronic paste. At present, the electronic paste used in my country is basically micron-level pure silver powder, which is expensive and mainly imported. Micron sterling silver powder has the problem of particle sedimentation in the la...
Read More
-
Chemical modification and dispersion is to use the surface groups of nanoparticles to form chemical bonds with reactive organic compounds. The nanoparticles are soluble in organic media due to the branched chains or groups of organic compounds on the surface. dispersion in. There are usually two ways of chemical modification: one is to use the end groups of macromolecules to chemically react with ...
Read More
-
Nanoparticles have a special surface structure, which lacks adjacent coordinating atoms on the surface, and has high activity, so it is easy to agglomerate. Due to the strong self-absorption property among nanomaterial particles, the agglomeration of nanoparticles is inevitable. Aggregates can be divided into two types: hard agglomerates and soft agglomerates. The formation process of agglomerates...
Read More
-
The thermal properties of nanomaterials are inseparably linked to the motion behavior of molecules and atoms in the material. such as the melting point of nanomaterials. The melting point of a solid substance is fixed when its form is large in size. For nanoparticles, due to the small particles, the high surface energy of the particles, the large number of surface atoms, the incomplete coordinatio...
Read More
-
Particle size: The size of the particles is called particle size, usually the particle size of spherical particles is expressed by diameter/particle size, and the particle size of cubic particles is expressed by side length. Particle size is the diameter of a particle. However, most of the particles in practice are irregular. Therefore, in order to describe the size of the particles more convenien...
Read More
-
Nanomaterials exhibit many exotic properties that traditional materials do not have. The first thing we need to know is that the nanometer (mainly refers to less than 100nm) of the composition of nanomaterials has four major effects: 1. Small size effect The boundary conditions of the crystal periodicity are destroyed; the atomic density near the surface layer of the amorphous nanoparticle decreas...
Read More
-
The size of the particles is called the particle size of the particles, which may also be referred to as particle size. Particle size or particle size refers to particle diameter. Of course, for non-spherical particles, the particle size is related to the measurement criteria and statistical methods, and the particle size can only be "equivalent". The percentage (or cumulative percentage) of parti...
Read More
-
The value of nanomaterials is not only limited to its good performance in the information industry, biomedicine, aerospace and environmental protection, etc., but also that it can go deep into the details of life, and through the transformation of traditional manufacturing, it will have a subtle impact on human clothing, food, housing and transportation. Materials are the material basis for all te...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
