-
Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
Read More
-
Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
Read More
-
In building energy conservation, the light transmission and heat insulation of glass is a very critical issue. In buildings with transparent ceilings and large-area exterior windows, the thermal radiation of sunlight will lead to an increase in the energy consumption of air conditioners, resulting in a large energy waste. In order to improve this phenomenon, nano-scale antimony doped tin oxide ATO...
Read More
-
Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
Read More
-
Transmission Electron Microscope (TEM) Transmission electron microscopy uses an electron beam that penetrates a sample to image, which requires the sample being observed to be "transparent" to the incident electron beam. Transmission electron microscopy is widely used in materials science and biology. Since electrons are easily scattered or absorbed by objects, the penetration is low, and the dens...
Read More
-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
Read More
-
Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
Read More
-
Nano thermal insulation coatings can be used to absorb ultraviolet rays from sunlight, and are often used in current decoration buildings. Water-based nano transparent thermal insulation coating not only has the effect of high efficiency and energy saving, but also has the comprehensive advantages of green environmental protection, health and safety. As an alternative product of solvent-based glas...
Read More
-
Infrared light has an obvious thermal effect, which can easily lead to an increase in ambient temperature. Ordinary architectural glass has no thermal insulation effect, and can only be achieved by means of filming. Therefore, architectural glass, car film, outdoor facilities and other surfaces need to use thermal insulation materials to achieve the effect of thermal insulation and energy saving. ...
Read More
-
With the low-carbon economy becoming a global hotspot, energy-saving materials are increasingly favored by people. In building energy conservation, the light transmission and heat insulation of glass is a very critical issue. In buildings with large areas of exterior windows and transparent ceilings, car windows and other occasions, the thermal radiation of sunlight will lead to an increase in the...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
