-
Nano zinc oxide materials have been successfully applied to textiles in many fields such as medical, health, and health care. The antibacterial mechanism of nano zinc oxide is actually the result of the combined action of photocatalysis and metal ion dissolution. Finishing process: weigh 3g low poly sodium polyacrylate, adjust the pH to 9-10 with 10% ammonia water, add 80g water and 1.5g nano zinc...
Read More
-
Under the situation of rapid development of science and technology, to prepare high-temperature, high-performance, new-type materials, the first thing to do is to solve the refractory materials needed in the preparation process. The characteristics of refractory materials are as follows: 1. Mechanical properties The elastic modulus of special refractory materials is large. Most have higher mechani...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, and the performance of β type is better than that of α type. Type β has ...
Read More
-
Carbon nanotubes are simply classified according to the number of layers of graphene sheets: single-walled carbon nanotubes and multi-walled carbon nanotubes. The difference between the two is mainly reflected in: 1. Discover the time difference In 1991, when Li Ji-ma, an electron microscope expert in the Basic Research Laboratory of NEC Corporation, Japan, observed the C60 structure under a high-...
Read More
-
Conductive glue is composed of non-conductive resin and conductive filler. Since epoxy resin has excellent mechanical and thermal properties, low shrinkage, good bonding ability, resistance to mechanical and thermal shock, and strong resistance to humidity, solvents and chemical reagents, epoxy resin The resin system conductive adhesive is the most researched. As the key material of conductive adh...
Read More
-
1. The history of nano gold powder development In 1885, nano gold solution was often used as the main ingredient in the treatment of alcoholism in the United States; In 1890, Dr. Koch discovered that Mycobacterium tuberculosis could not survive on the surface of gold; Nano gold was used to treat arthritis in 1890; In 1935, Chicago surgical expert Edward et al. discovered that nano-gold solution ca...
Read More
-
1. The advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides, such as yttrium oxide, cerium oxide, calcium oxide, and magnesium oxide. The essence of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria-doped zirconia has good comprehensive properties, and is al...
Read More
-
The beta silicon carbide whiskers produced by SAT NANO are needle-shaped cubic crystals. As an atomic crystal, it has low density, high melting point, high strength, high modulus, low thermal expansion rate, and excellent properties such as wear resistance, corrosion resistance, high temperature resistance, and oxidation resistance. It is mainly used for metal substrates and ceramic substrates. , ...
Read More
-
As a new material of the technological revolution, ceramic materials have attracted the attention of some developed countries as early as more than ten years ago. The fatal shortcomings of ceramic materials are its brittleness, low reliability and low repeatability. These shortcomings have seriously affected the application range of ceramic materials. Only by improving the fracture toughness of ce...
Read More
-
Aerospace super alloy parts processing solution 1. With traditional craftsmanship in aviation blade manufacturing and processing problems, metal 3D printing technology can solve the problem ingeniously 2. At the same time, under the premise of ensuring the function, the primary requirement of the lightweight aerospace industry for parts, metal 3D printing technology can easily realize the lightwei...
Read More
-
When using copper powder as the conductive filler to prepare the conductive ink, what is the appropriate amount of copper powder added, and what specific effect does the added amount of copper powder have on the conductive performance of the conductive ink. Printed electronics is an advanced electronics manufacturing technology that has emerged and popularized in recent years. Conductive ink is a ...
Read More
-
Among metals, the conductivity of copper powder conductive paste is second only to silver, with high bonding strength and low cost, which makes the advantages of copper powder conductive paste particularly prominent. So, what is the performance of copper powder conductive paste in all aspects of application? 1. The conductivity of copper powder conductive paste Copper powder conductive paste requi...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
