13929258449

admin@satnano.com

Search

Home

Search

  • 15

    Jul

    Flake aluminum powder can be used in paints, coatings, printing inks, plastic

     Application of flake aluminum powder 1) Industrial coatings The industrial coatings market includes the following areas: can coatings, coil coatings, general industrial coatings, marine coatings, powder coatings, anti-corrosion coatings, roof coatings, etc. The three types of coatings with the largest amount of aluminum powder pigments are: roof coatings (increasing aesthetics, extending the...
    Read More
  • 24

    Jul

    Supply Nano iron oxide powder to be widely used in various fields

    1. Application of Nano Iron Oxide in Decoration Materials In pigments, nano-iron oxide is also called transparent iron oxide (iron penetration). The so-called transparency does not specifically refer to the macroscopic transparency of the particles themselves, but refers to the dispersion of pigment particles in the organic phase to make a layer of paint film (or oil film). When light is irradiate...
    Read More
  • 02

    Aug

    New progress: 3D printing can provide new application opportunities for tungsten materials

    Studies have shown that laser energy density can process tungsten materials into good functional parts, and 3D printing can provide new application opportunities for tungsten materials to produce parts with high precision and complexity. Tungsten is a compact and strong metal. Because of its excellent corrosion resistance, it has been widely used in many fields such as chemical industry. However, ...
    Read More
  • 02

    Aug

    SAT NANO made significant progress of 3D printing tungsten thin-walled parts

    In 2018, SAT NANO launched a special spherical powder for refractory metal 3D printing. Recently, SATNANO used its independent research and development intellectual property rights to provide customers with customized spherical tungsten powder, and tried to print tungsten series shielding parts. The whole series of parts adopt a thin-wall structure and the minimum wall thickness is only 0.1mm. As ...
    Read More
  • 02

    Aug

    SAT NANO focus on refractory metal tungsten molybdenum tantalum spherical powder for 3D printing

    In recent years, metal 3D printing has become the fastest growing and one of the most promising technologies. It has been successfully applied to aircraft engine parts, medical implants, auto parts, aviation satellite components and other fields, as well as metal 3D printing equipment and applications in China. There are also breakthroughs. SAT NANO has independently researched and developed a ser...
    Read More
  • 02

    Aug

    Description of the production method of nano copper oxide powder

    SAT NANO is one of the best supplier of copper oxide powder in China, we can supply 20nm, 50nm, 100nm, 1-3um, 5um, 10um. Copper oxide has the advantages of high activity, soft agglomeration, low heavy metal impurities, and good dispersing performance. At the same time, because of its own characteristics, copper oxide is widely used in catalysis, sterilization and other fields. production method 1....
    Read More
  • 02

    Aug

    Application of nano-copper oxide film in optoelectronic devices, surface acoustic wave devices, solar cells

    Application of Nano Copper Oxide Film Nano copper oxide film has good transparent conductivity, piezoelectricity, photoelectricity, gas sensitivity, pressure sensitivity, and is easy to integrate with a variety of semiconductor materials. Due to these excellent properties, it has a wide range of uses and many potential applications, such as optoelectronic devices, surface acoustic wave devices, pl...
    Read More
  • 10

    Aug

    How to solve the part clamping when metal 3D printing and machining are connected3D printing is a flexible technology with less constraints on design. With the help of 3D printing technology, designer

    3D printing is a flexible technology with less constraints on design. With the help of 3D printing technology, designers can realize complex design schemes such as lightweight structures and functional integrated structures. Many metal 3D printed parts require traditional machining processes such as milling and EDM to generate accurate surfaces. However, metal 3D printing technology often produces...
    Read More
  • 10

    Aug

    How to clamp these complex metal 3D printed parts with fixtures

    Many metal 3D printed metal parts need to be machined to produce a precise surface, but because metal 3D printed parts are often lightweight parts with complex geometric shapes, this brings challenges to subsequent machining. When machining metal 3D printed parts, it is necessary to consider whether the rigidity of 3D printing meets the requirements of machining, how to clamp these complicated met...
    Read More
  • 10

    Aug

    what you don't know,detailed explanation of all applications of nano silica SiO2 powder

    Nano silica SIO2 is an important member of nano-materials. SAT Nano is currently capable of mass production. This move is bound to be China's electronic packaging materials, polymer composite materials, ceramics, rubber, plastics, glass steel, adhesives, and sealing The upgrading of products in many industries, such as glue and coating, brings new opportunities. Nano SIO2 silica is widely used in ...
    Read More
  • 10

    Aug

    what you don't know,detailed explanation of all applications of nano titanium dioxide TiO2 powder

    1. As a sensor material Nano TIO2 can be used not only for humidity and pressure sensitive components, but also as a sensor material to detect a variety of gases. For example, TIO2 can detect flammable gases such as H2, CO, and O2, and is especially used as an automobile exhaust sensor. By measuring the oxygen content in automobile exhaust, it can control the efficiency of automobile engines. 2. T...
    Read More
  • 26

    Aug

    The difference between light magnesium oxide powder and light burnt powder

    We all know that magnesium oxide is active and light, and there is also a kind of light burned powder also called magnesium oxide. However, many people mistakenly believe that light burned powder is light magnesium oxide, but in fact it is not the case. Although the main components of both are MgO, the important difference between light burnt and light weight is that the content is different, the ...
    Read More
< 1 2 3 4 5 6 7 8 9 10 >
[  A total of  15  pages]
Leave a message Please click here for inquiry
Provide the right solution according to your needs,offer efficient service,leave a message for the product information and requirements you need,customize now!