-
Among metals, the conductivity of copper powder conductive paste is second only to silver, with high bonding strength and low cost, which makes the advantages of copper powder conductive paste particularly prominent. So, what is the performance of copper powder conductive paste in all aspects of application? 1. The conductivity of copper powder conductive paste Copper powder conductive paste requi...
Read More
-
Conductive silver paste is a low-temperature baking conductive silver paste specially designed for resistive and capacitive touch screen circuits. It is made of high-performance resin and silver powder, with good conductivity, and the content of silver particles in the conductive silver paste. Metal silver particles are the main component of conductive silver paste, and the conductive properties o...
Read More
-
Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
Read More
-
Cu is a transition metal and has a special electronic structure and electronic gain and loss properties that are different from other metals. It can show good catalysis for different chemical reactions and is widely used in the field of catalysts. When the size of CuO particles is as small as nanometers, due to the special characteristics of multiple surface free electrons and high surface energy ...
Read More
-
The displacement reaction method is a common process for processing silver-coated copper powder. Because the surface activity of copper powder is very large, it is easy to oxidize, so it must be pretreated before coating the copper powder. 1. Put the required amount of copper powder into the pretreatment tank, and then wash with 15% 30% dilute sulfuric acid to keep the pH of the solution at 3 2. W...
Read More
-
The phase change toughening of yttrium stabilized nano zirconia and the toughening effect of nanoparticles are used to improve the comprehensive mechanical properties of the alumina matrix. Adding different contents of nano 3Y-ZrO2 to the alumina matrix, the comprehensive mechanical properties of the material with a content of 15wt% of nano ZrO2 reach the best (flexural strength 766.74MPa, fractur...
Read More
-
Nano cuprous oxide Cu2O is a kind of photoelectric material with a wide range of uses. The main uses are as follows: Nano cuprous oxide Cu2O is used as anti-fouling primer for ships in the coating industry to prevent marine organisms from adhering to the bottom of ships; Nano cuprous oxide Cu2O is used as a colorant for red glass and red enamel in the glass and ceramic industries; Nano cuprous oxi...
Read More
-
Because nano copper oxide CuO is a p-type semiconductor, it has holes (CuO) +, which may interact with the environment and play an antibacterial or antibacterial effect. Studies have shown that nano CuO has good antibacterial ability against pneumonia and Pseudomonas aeruginosa. The antibacterial process of metal oxide nano-copper oxide CuO can be simply described as: under the excitation of light...
Read More
-
Primary particle size parameters of nano copper oxide:20nm, 50nm, 100 nanometers, purity 99% Min. Application of nano copper oxide: 1. Nano copper oxide is an important multifunctional inorganic material, which is widely used in printing and dyeing, ceramics, glass and medicine and other fields. 2. Nano-copper oxide can also be used as a burning rate catalyst for rocket propellants. It can no...
Read More
-
Nanoparticles have a special surface structure, which lacks adjacent coordinating atoms on the surface, and has high activity, so it is easy to agglomerate. Due to the strong self-absorption property among nanomaterial particles, the agglomeration of nanoparticles is inevitable. Aggregates can be divided into two types: hard agglomerates and soft agglomerates. The formation process of agglomerates...
Read More
-
In order to obtain the correct data of the primary particle size, it is often necessary to open the agglomerated particles in the particle size test to form a particle monomer and keep it uniformly dispersed in the medium. This operation is called "dispersion". The requirement of the laser particle size analyzer for the dispersion system is "dispersion without segregation". Dispersion techniques a...
Read More
-
The value of nanomaterials is not only limited to its good performance in the information industry, biomedicine, aerospace and environmental protection, etc., but also that it can go deep into the details of life, and through the transformation of traditional manufacturing, it will have a subtle impact on human clothing, food, housing and transportation. Materials are the material basis for all te...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
