The specific surface area of a powder is an important physical property, which refers to the total surface area (in square meters) of an oxide powder per unit mass (in grams). The size of the specific surface area is related to factors such as particle size, shape, and porosity of the powder. Generally speaking, the smaller the particles and the higher the porosity, the larger the specific surface...
Read More
The preparation method is one of the key factors affecting the specific surface area of oxide powders. Different preparation methods can lead to differences in the size, shape, and porosity of powder particles, thereby affecting their specific surface area. For example, the sol gel method can prepare oxide powders with high specific surface area, uniform particle size and fine size; The co precipi...
Read More
There are different types of 3D printing according to different materials, among which metal powder is one of the main raw materials for 3D printing, and high-purity metal powder needs to be used as the raw material. The relevant parameters of the powder, such as chemical composition, particle shape, particle size and distribution, flowability, etc., have a great impact on the quality of 3D printi...
Read More
The composition of TC4 titanium alloy is Ti-6AI-4V, which belongs to the (a+β) type titanium alloy. It has good comprehensive mechanical properties, high specific strength, excellent corrosion resistance, good biocompatibility, and is widely used in aerospace, petrochemical, biomedical and other fields. This article selects the plasma rotating electrode method to prepare titanium alloy powder, and...
Read More
In recent years, with the rapid development of 3D printing technology, NiTi alloy powder has attracted much attention as a key raw material for biomedical implants. As the foundation of 3D printing, the quality of powder raw materials is crucial, and the plasma rotating electrode atomization method has attracted much attention. Preparation method of plasma rotating electrode The PREP method is use...
Read More
After purchasing our company's nano iron oxide powder, the customer found that the particle size was larger during testing. Why is that? Because the particle size of nano powder is very fine, it is easy to agglomerate, so the large particle size tested is the particle size after agglomeration. So how can we effectively disperse nano iron oxide powder? Next, we will introduce how to use ultrasonic ...
Read More
The reasons for peak shift in XRD (X-ray diffraction) usually involve changes in the properties of the sample itself or the influence of experimental conditions, which can be analyzed from the following aspects: 1. Sample factors 1.1 Residual stress or lattice strain Residual stress: Residual stress inside the material (such as compressive stress or tensile stress) can cause changes in the lattice...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
