-
1, thermal silica gel and thermal epoxy resin Ultra-high thermal conductivity nano AlN composite silica gel has good thermal conductivity, good electrical insulation, wide electrical insulation temperature (operating temperature -60 ° C - 200 ° C), low consistency and good construction performance. The products have reached or exceeded the imported products, because they can replace the similar im...
Read More
-
Nano-scale silicon carbide has the following characteristics: 1. Its microhardness is 2840 ～ 3320kg / mm², its hardness is between corundum and diamond, and its mechanical strength is higher than corundum. 2. It has a strong ability to absorb infrared waves, can be used as infrared absorbing and transmitting materials, made into functional films or fibers, and can also be used for polishing and gr...
Read More
-
Production process steps of zirconium powder and hafnium powder: Zirconium sponge, hafnium sponge → hydrogenation → crushing → sieving → dehydrogenation → crushing → sieving → mixed inspection → batch batch → vacuum packaging, immersion bottled → factory sales SAT NANO can supply the zirconium powder and hafnium powder with different particle, if you have any enquiry, please contact us at admin@sa...
Read More
-
Nano oxides have many unique properties and have been widely used in textile fields such as antibacterial, deodorant, and ultraviolet protection. Similarly, nano-oxides have a positive effect on anti-wrinkle finishing. Nano-titanium dioxide or nano-silica is added to the traditional system to form nano-oxide anti-wrinkle finishing liquid through high-speed shearing, so that the fabric has anti-wri...
Read More
-
Nanotechnology has been successfully applied in China's medical field. A group in Nanjing used nano silver technology to develop and produce a medical dressing, a long-acting broad-spectrum antibacterial cotton. The production principle of this antibacterial cotton is to make silver into 20 nanometer ultrafine particles through nanotechnology, and then attach it to cotton fabric. Silver has the ef...
Read More
-
The role of metals aluminum in refractory materials: Plastic phase forming: The metal lattice will slip under the action of stress, which has plastic characteristics. Compared with the hard inorganic material particles, it will play the plastic forming characteristics during the forming process, so that the same The density of the green body prepared under the forming pressure is higher than that ...
Read More
-
Flake aluminum powder is also known as aluminum powder pigment. Aluminum powder pigment is one of the important metal pigments. It is a high-purity (99.3%~99.97%) metal aluminum as raw material, which is produced by wet ball milling process. Compared with other pigments, aluminum powder pigments have their unique performance characteristics. Characteristics of flake aluminum powder 1) Covering cha...
Read More
-
In recent years, metal 3D printing has become the fastest growing and one of the most promising technologies. It has been successfully applied to aircraft engine parts, medical implants, auto parts, aviation satellite components and other fields, as well as metal 3D printing equipment and applications in China. There are also breakthroughs. SAT NANO has independently researched and developed a ser...
Read More
-
Many metal 3D printed metal parts need to be machined to produce a precise surface, but because metal 3D printed parts are often lightweight parts with complex geometric shapes, this brings challenges to subsequent machining. When machining metal 3D printed parts, it is necessary to consider whether the rigidity of 3D printing meets the requirements of machining, how to clamp these complicated met...
Read More
-
Precious metals refer to some rare and expensive metal materials, such as silver, gold, ruthenium, rhodium, palladium, platinum, iridium and other expensive metals. Nanomaterials refer to materials at the nanometer level on one-dimensional or multi-dimensional scales, such as nanowires and nanoparticles. Noble metal nanoparticles are nanomaterials composed of these noble metals, such as gold nanop...
Read More
-
Dental restoration parts customization Solution 1. Personalized and complex geometric products are the areas where metal 3D printing technology is best at, ensuring a good match with the patient’s mouth, and the surface roughness of the parts is very suitable for the adhesion between the ceramic outer layer and the body 2. Cobalt-chromium alloy is used for printing materials, which has good biolog...
Read More
-
Nanomaterials exhibit many exotic properties that traditional materials do not have. The first thing we need to know is that the nanometer (mainly refers to less than 100nm) of the composition of nanomaterials has four major effects: 1. Small size effect The boundary conditions of the crystal periodicity are destroyed; the atomic density near the surface layer of the amorphous nanoparticle decreas...
Read More
online service
13929258449
admin@satnano.com
+ 8613929258449
