Conductive thin film used silver nanowire AgNWs 30nm

Specification of Silver Nano wire:

Diameter:20-30nm

Length:20-30um

Purity:99.95%

Note: We can supply different size products of Silver Nanowire according to client's requirements.

Silver nanowires have high specific surface area, electrical conductivity, thermal conductivity and other properties:

1. Surface Plasmon Effect: Surface Plasmons (SPs) refer to electron-dense waves that propagate along the metal surface due to the interaction of free-vibrating electrons and photons present on the metal surface.

2. Silver is a good conductor of electricity, its resistivity is low, and its conductivity is high. The application of nano-silver wire to the conductive layer leads to the collected current, which can reduce energy loss compared with TCO semiconductor.

3. If nano silver wires with a particle diameter smaller than the incident wavelength of visible light are used, the silver wires can be arranged very densely, and this technique can increase the current collecting area of the silver electrodes of the solar cells. And does not block the transmission of light, but also utilizes the characteristics of diffraction of light to fully absorb light energy.

Application of Silver Nanowire:

1.Optical application

It can be used as an optical limiter in solar energy (crystalline silicon, a sheet on PET or glass), and can have a surface enhancement spectrum in medical imaging.

2. Conductive application

It can be used as a conductive paste for high-brightness LEDs, and can also be applied to touch screens, computer boards, liquid crystal displays, and sensors.
3. Chemical and thermodynamic applications
It can be used in catalysts, sensors, chemical vapor sensors, conductive pastes, pastes and polymers.

SEM of Silver Nanowire:

Storage conditions:
Silver Nanowire should be sealed and stored in a dry and cool environment. It should not be exposed to the air for a long time, to prevent agglomeration due to moisture, affecting the dispersion performance and use effect, and should avoid heavy pressure, do not contact with oxidant, and transport according to ordinary goods.