CAS 7440-05-3 Pd nanopowder Ultrafine Palladium as catalyst
Size:20-30nm Purity:99.95% CAS No:7440-05-3 ENINEC No.:231-115-6 Appearance:black Powder Shape:spherical
13929258449
Size:20-30nm Purity:99.95% CAS No:7440-05-3 ENINEC No.:231-115-6 Appearance:black Powder Shape:spherical
We can supply different size products of niobium silicide powder according to client's requirements. Size:1-3um; Purity:99.5%;Shape:granular CAS No:12034-80-9;ENINEC No.:234-812-3
Ni2Si particle,99.5% purity,granular shape,is used for Microelectronic integrated circuit, nickel silicide film,etc. Size:1-10um; CAS No:12059-14-2;ENINEC No.:235-033-1
Buy Iron based alloy powder, plasma cladding powder, laser cladding powder 0-15um and 15-53um 45-106um size, 99.9% purity, high quality and good price and fast delivery time, please check the specification.
Brand:
SAT NANOItem NO.:
FeCrBSi-15UPayment:
TT, Paypal, WUProduct Origin:
ChinaColor:
grey PowderShipping Port:
Shenzhen, ShanghaiLead Time:
1-5daysMin Order:
1kgSpecification of Iron based alloy powder:
Product name:Iron based alloy powder
MF:FeCrBSi
Purity:99.9%
Particel size:0-15um, 15-53um, 45-100um
Shape:Spherical type
Note: We can supply different size products of FeCrBSi alloy Powder according to client's requirements.
Chemical composition and Application
Iron-based self-fluxing alloy powders are more widely used than cobalt-based and nickel-based self-fluxing alloy powders, and have a certain wear resistance. They are widely used in shafts and scrapers in energy industries such as steel industry, coal industry, and petroleum industry. Large-area surfacing and cladding of plates, cylinders, wear-resistant plates, pipes, bars, etc.
Chemistry |
Grade |
Flow Density |
Size |
Hardness |
Application Data |
|
Iron Based Alloy Powder |
|
|
|
|||
FeNiCrSiB Atomize |
C 0.2 Si 3.0 B 1.5 Cr 6 Ni 28 Fe Bal |
Fe30 |
20-25s/50g 3.8g/cm3 |
-150mesh+45um -106+45 um |
30HRC |
With favorable antifaingue propetly, applicable for circumstance under repeated impact but with low hardness requirement |
FeNiCrSiWB Atomize |
C 0.6 Si 3.0 B 2.0 Cr 12 Ni 20 W 3.0 Fe Bal |
Fe45 |
20-25s/50g 3.8g/cm3 |
-150mesh+45um -106+45 um |
45HRC |
For repair of sealing face of valve and vulnerable parts of machine |
FeNiCrSiB Atomize |
C 1.2 Si 3.5 B 2.6 Cr 22 Ni 15 Fe Bal |
Fe55 |
20-25s/50g 3.8g/cm3 |
-150mesh+45um -106+45 um |
55HRC |
For repair of harrow piece shovel tooth, petroleum drilling rod joint and scraper shaft |
FeNiCrSiB Atomize |
C 1.5 Si 3.5 B 3.0 Cr 35 Ni 15 Fe Bal |
Fe60 |
20-25s/50g 3.8g/cm3 |
-150mesh+45um -106+45 um |
60HRC |
For repair of harrow piece shovel tooth, petroleum drilling rod joint and scraper shaft |
FeNiCrSiB Atomize |
C 0.8 Si 2.0 B 1.5 Cr 14 Ni 6 Fe Bal |
Fe55T |
20-25s/50g 3.8g/cm3 |
-150mesh+45um -106+45 um |
55HRC |
For repair of harrow piece shovel tooth, petroleum drilling rod joint and scraper shaft |
Storage conditions:
Iron based alloy powder should be sealed and stored in a dry and cool environment. It should not be exposed to the air for a long time, to prevent agglomeration due to moisture, affecting the dispersion performance and use effect, and should avoid heavy pressure, do not contact with oxidant, and transport according to ordinary goods. Before spraying the ceramic coating, be sure to spray the nickel-based or self-fluxing alloy powder produced by our company as a primer to improve the bonding strength between the coatings.